Back to search

University of British Columbia

Motion control of non-fixed base robotic manipulators

Abstract

dc:description

Robotic manipulators mounted on spacecraft experience a number of kinematic, dynamic, and control problems because the motion of the spacecraft is affected by the robot motion. Because of this dynamic coupling, robot motion required to produce a given robot end-effector position for a fixed base manipulator would not result in correct end-effector position for the same manipulator mounted on a spacecraft. In this thesis, the general three dimensional equations of motion are derived for an n link manipulator mounted on a non-fixed base object. Instead of performing a single inverse kinematic calculation at the beginning of a movement to determine the required joint setpoints, multiple inverse kinematic updates are done throughout a movement. The updating sequence is determined by an optimal inverse kinematic updating algorithm. This motion control algorithm is based on experimental simulation results performed in Matlab and a set of performance indices that are used as guidelines. Simple PD joint controllers are used for servoing the manipulator joints for a planar robot application. A joint trajectory generator utilizing velocity time scaling and quintic polynomials is developed. In addition to compensating for the base motion, it is shown that multiple updating requires less energy consumption than single inverse kinematic calculation based movements. Endpoint overcompensation and endpoint servoing are two techniques that enable any desired manipulator accuracy assuming kinematic and dynamic singuarities are not encountered. The derived motion control techniques incorporate the base motion without base motion control. Knowledge of the system dynamics is not required and the iterative inverse kinematics is performed online without model prediction.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1997

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Carter, Frederick Michael

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5918

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Carter, Frederick Michael. Motion control of non-fixed base robotic manipulators. master's thesis, University of British Columbia, 1997. http://hdl.handle.net/2429/5918