Back to search

University of British Columbia

Adaptive insertion of cohesive elements for simulation of delamination in laminated composite materials

Abstract

dc:description

Composite materials are increasingly being used in advanced structural ap- plications. Debonding of adjacent laminate layers, also known as delamination, is considered to be one of the most dominant damage mechanisms affecting the behavior of composite laminates. Various numerical methods for simulating delamination in composite materials do exist, but they are generally limited to small-scale structures due to their complexity and high numerical cost. In this thesis, a novel technique aimed to allow efficient simulation of delamination in large-scale laminated composite structures is presented. During the transient analysis, continuum elements within regions where delamination has the potential to initiate are adaptively split through their thickness into two shell elements sandwiching a cohesive element. By elimi- nating the a priori requirement to implant cohesive elements at all possible spatial locations, the computational efforts are reduced, thus lending the method suitable for treatment of practical size structures. The methodol- ogy, called the local cohesive zone method (LCZ), is verified here through its application to Mode-I, Mode-II and Mixed-Mode loading conditions, and is validated using a dynamic tube-crushing loading case and plate impact events. Good agreement between the numerical results and the available experimental data is obtained. The results obtained using the LCZ method are compared favourably with the numerical results obtained using the con- ventional cohesive zone method (CZM). The numerical performance of the method and its efficiency is investi- gated. The efficiency of the method was found to be superior compared to that of the conventional CZM, and was found to increase with increasing model size. The LCZ method is shown to have a lower effect on reducing the structural stiffness of the structure, compared to the conventional CZM. The results obtained from the application of the LCZ method to the various cases tested are encouraging, and prove that the local and adaptive insertion of cohesive zones into a finite element mesh can effectively capture the delamination crack propagation in laminated composite structures. It is expected that further improvements in speed and accuracy will be attained once the algorithm is embedded within commercial finite element solvers as a built-in feature.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shor, Ofir

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/59338

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Shor, Ofir. Adaptive insertion of cohesive elements for simulation of delamination in laminated composite materials. doctoral thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/59338