University of British Columbia
Storage of carbon dioxide in depleted natural gas reservoirs as gas hydrate
Abstract
dc:descriptionMore than 120 depleted natural gas reservoirs in Alberta, Canada have been identified as potential sites for CO₂ storage at temperature and pressure conditions at which CO₂ may form gas hydrate. Reservoir simulations presented in the literature have demonstrated the feasibility of storing CO₂ in such reservoirs. In this thesis, the injection of CO₂ in a laboratory size reservoir (packed bed of silica particles) serving as a physical model for a depleted reservoir was studied. The hypothesis was that injecting CO₂ into the reservoir at gas hydrate formation conditions will be beneficial in terms of increased CO₂ storage density. It is noted that CO₂ is stored not only as hydrate but also some is dissolved in the residual pore water (not converted to hydrate) and some as a gas in the remaining pore space. The results indicate that hydrate formation enhances the CO₂ storage density. The work also demonstrated that substances like tapioca starch added to the water in small quantities (1 wt %) delayed the onset of hydrate nucleation in the earlier stage but subsequently more CO₂ was stored as hydrate compared to the tapioca starch-free systems. The delay in nucleation decreases the risk to form a hydrate plug in the injection system. The injection of the CO₂-rich mixture (90 mol % CO₂/10 mol % N₂), which is a typical composition of a flue gas after CO₂ capture process, into a reservoir with CH4 (simulating residual natural gas) was also studied in the laboratory reservoir. It was found that the total CO₂ storage density (in hydrate, gaseous and dissolved state) decreased from 143 kg/m³ (the CO₂ injection into a CH₄ free reservoir) to 119 kg/m³. Finally, relevant phase equilibrium data were obtained in a constant volume high pressure vessel and by calorimetry. The results were found to be in good agreement with thermodynamic model calculated values within ± 40 kPa and ± 0.2 K, respectively.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy - PhD
- Level thesis:degree_level
- doctoral
- Discipline thesis:degree_discipline
- Chemical and Biological Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Sun, Duo
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/59341