Back to search

University of British Columbia

Characterization of linear friction welded in-service Inconel 718 superalloy

Abstract

dc:description

The focus of this thesis was to study the suitability of the linear friction welding (LFWing) process to manufacture or repair of Inconel® 718 superalloy (IN 718) aero engine BLISKs. This was achieved by simulating a LFW joint made of virgin (V) and in-service (IS) (from samples extracted from an actual turbine disk) IN 718 material. An in-depth microstructural characterization of the V and IS material in the as-received, as-welded and post weld heat treated (PWHT) conditions was carried out. Quantitative analysis of the phase constituents, such as the δ phase, MC-type carbides, MN-type nitrides and the γ grain size of the as-welded and PWHT samples was performed using electron backscattered diffraction (EBSD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analyses. Mechanical testing also revealed that variation in the γ grain size, as well as the distribution and the volume fraction of the precipitates had a significant impact on the alloy’s hardness and tensile properties. Defect analysis of the as-welded samples revealed that the weld interface was free of oxides, voids, contamination and liquation of secondary phases (e.g., carbides and Laves phases). Grain refinement of the γ grains was observed at the weld interface and was related to the occurrence of dynamic recrystallization during the LFWing process. Quantitative analysis of the residual strains and stresses in the as-received, as-welded and PWHT samples was achieved using the neutron diffraction technique. The results revealed that careful selection of the beam gauge volume and stress-free lattice spacing were essential for accurate stress analysis. The results suggested the residual stress increased in magnitude from the base metal and reached a peak at the weld interface. The peak magnitudes of the residual stresses were below the yield strength of IN 718. The results of this work are of significant importance when developing manufacturing and repair processes for IN 718 material components.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Smith, Mathew MacMaster

Rights

dc:rights
Statement dc:rights
  • Attribution-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/61436

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Smith, Mathew MacMaster. Characterization of linear friction welded in-service Inconel 718 superalloy. doctoral thesis, University of British Columbia, 2017. http://hdl.handle.net/2429/61436