Back to search

University of British Columbia

Resistance of concrete railroad ties to impact loading

Abstract

dc:description

In some sections of railroad, many prestressed concrete railway ties were found to be cracked after being in service for only a few months, because of impact loading. The dynamic properties of concrete ties were thus studied in this work. Two typical types of impulse encountered in track, due to rail abnormalities and "wheel flats" of trains, were successfully simulated by the use of a 578 kg impact machine and a 60 kg drop weight impact machine, respectively. The previously developed "single-blow" impact technique has been extended into a "multi-blow" impact technique, in order to better simulate the repeated impact loading on the concrete tie in track. It was found that the stiffness of the rubber support played an important role in the dynamic response of the ties. Using the soft rubber support caused a low maximum load, low loading rate, a higher fracture energy and a ductile flexural fracture mode. Using the hard support caused a brittle flexure-shear or shear failure mode. Crack mode analysis showed that the cause of the crack mode changing from flexural under quasi-static loading to shear under impact loading is that the shear to moment ratio at the mid-span of the tie changes under impact. A crack mode prediction method was proposed. In the second series of tests, twelve types of modified ties were tested. The effects of the concrete strength, steel fibre additions, changes in prestressing force, the presence of stirrups were examined. The crack opening length and residual crack length were detected by crack detection gauges. Steel fibres greatly improved tie behaviour, leading to shorter and finer cracks in the concrete. Stirrups can, particularly when used in conjunction with fibres, effectively retard the deterioration of the concrete tie. The ties with a 40 MPa compressive strength and 30 mm fibres behaved very well. They were markedly better than the ties which had the same fibre content but a 65 MPa concrete compressive strength. The reason for this is that reducing the concrete compressive strength or prestressing level of the tie resulted in a reduction of the dynamic flexural stiffness and hence the magnitude of the impact loads. It is believed that if these measures were combined with the use of steel fibres in the concrete, a new type of concrete tie, with improved ductility and high resistance to impact load could be developed. Dynamic analysis of the ties showed that a different impulse duration or frequency may lead to a very different concrete strain response. This may need to be considered in the wheel truing program in service. Thirteen types of commercial pads were tested and ranked. Soft pads may act as a low-pass filter, leading to lower amplitudes of the concrete strain vibration. However, it may structurally deteriorate more quickly, leading to an even worse influence on the ties after a period of time in service.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1996

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wang, Nianzhi

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/6177

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wang, Nianzhi. Resistance of concrete railroad ties to impact loading. doctoral thesis, University of British Columbia, 1996. http://hdl.handle.net/2429/6177