Back to search

University of British Columbia

Anion exchange resins for the removal of microcystins from surface water

Abstract

dc:description

Harmful algal blooms have markedly increased in frequency over the past two decades, due to rising global temperatures and chemical runoff produced by modern farming practices. Cyanobacteria, also known as the blue green algae, are an essential part of the aquatic food chain. Cyanobacterial toxins, which are released from the algal biomass, can contaminate drinking, recreational and agricultural water reserves. Such environmental and health hazards pose a serious threat to communities and many aquatic ecosystems. In particular, small, shallow lakes that are sources of drinking water for rural communities have been particularly affected by elevated levels of algal toxins. Conventional water treatment systems are inefficient in removing these toxins, and may produce hazardous by-products. Additionally, the effectiveness of chemical oxidants, like chlorine and ozone, is hindered by the presence of natural organic matter (NOM) and inorganic ions in the contaminated water. Such challenges reveal the need for alternative treatment technologies capable of removing algal toxins. Anionic ion exchange (IX) resins offer a promising and cost-effective treatment alternative for natural waters affected by high algal content and high dissolved organic carbon (DOC) levels. This research investigates the efficiency of strongly basic ion exchange resins for the removal of microcystin-LR (MCLR), the most common toxin released from the algal biomass, inorganic ions, and NOM from natural water sources. We focused specifically on optimizing resin dosage, resin regeneration, and scaling up such procedures for particular source waters. Our results showed that the resin exhibited an excellent adsorption capacity of 3850 µg/L, removing more than 80% of the MCLR within 10 minutes at examined resin dosages (10 to 1000 mg/L; 1mL of resin = 221 mg). Additionally, we examined the influence of operating parameters such as pH and adsorption capacity of the resin, as well as the impact of NOM fractions on the uptake of MCLR. The charge density and molecular weight of the source water NOM were found to play a major competitive role in the uptake of Microcystin-LR. The results of this study bring the promising potential of IX resins for the removal of Microcystins and NOM from surface waters to light.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dixit, Fuhar

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/63181

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dixit, Fuhar. Anion exchange resins for the removal of microcystins from surface water. master's thesis, University of British Columbia, 2017. http://hdl.handle.net/2429/63181