Back to search

University of British Columbia

Multi-axis ESPI interferometer for 3-D displacement measurements

Abstract

dc:description

Small displacement measurements have several applications in engineering. Deformations ranging from nanometric scale to micrometric scale are very often related to mechanical stresses, materials phase transformations, residual stresses, biological processes, etc. It is common that these deformations occur in three dimensions and are not easily measured with simple equipment. Electronic speckle pattern interferometry (ESPI) systems use interference of light and laser properties to measure such small displacements in a very reliable way. The ESPI technique is a full-field non-contact technique capable of 3D measurements but the arrangement can get very complicated when it comes to number of components, size, cost, assembly complexity and operation. Among the many factors contributing for the complexity, the most important ones are the number of light beams and optical elements, and the laser itself. High quality lasers offer very high coherence – which is a measure of purity of spectrum and therefore allow for very high quality measurements with very low noise – at a very high cost, and usually are bulky, requiring many extra components to split light beams and direct the light to the region of interest. The aim of this project is to use special components to eliminate the need for an expensive laser and simplify the arrangement for a 3D ESPI measurement. The introduction of a dual diffraction grating system makes it possible to replace a high quality laser with a low coherence, compact and cheap laser diode. Moreover, with this new proposed arrangement it is possible to obtain the 3D ESPI information using two in-plane ESPI systems combined in one, reducing complexity and offering up to 6 different measurement possibilities. Based on the fact that only 3 different measurements are required for solving a complete 3D displacement field, the remaining measurements can be used for data averaging and to increase the accuracy and reduce uncertainties. The new design is presented and a portable device is developed. The arrangement is explored to test the robustness against exterior factors such as temperature and ambient light, and the accuracy of the measurement is verified with a controlled sample and finite element analysis/analytical solutions.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zanini Broetto, Filipe

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/63868

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Zanini Broetto, Filipe. Multi-axis ESPI interferometer for 3-D displacement measurements. master's thesis, University of British Columbia, 2017. http://hdl.handle.net/2429/63868