Back to search

University of British Columbia

Ambient modal identification, finite element model updating, and seismic analysis of bridges on Trans-Canada Highway

Abstract

dc:description

This thesis features finite element model updating of two short-span concrete bridges, namely Gaglardi Way Underpass and Kensington Avenue Underpass. The main objective was to study the effect and determine the importance of finite element model updating by comparing the structural responses for the updated model to the preliminary model. The study was carried out by developing a finite element (FE) model and an operational modal analysis (OMA) model for each bridge. The FE model represented the analytical prototype of the actual structure, while the OMA model was used to extract the modal information for existing structure using the vibration data recorded under normal operating conditions from permanent sensors installed on corners and at mid-span of these bridges. The natural frequencies from OMA were set as a target for the FE model to match. The process of calibrating the analytical FE model to the match the modal information acquired from the experimental model is known as ‘Model Updating’. Having the frequency responses defined, a sensitivity analysis was conducted to determine the parameters that are most sensitive to change, based on which the FE model was automatically updated in an iterative manner. The modal assurance criterion (MAC) and mode shape responses were not used during calibration step since the vibration testing was not dense enough, however, they were solely used as a means of comparing the calibrated FE model to the experimental results. Once the objective of model updating was accomplished, a linear modal time history analysis was carried out using three ground motions having a low, medium range, and a very high peak ground acceleration (PGA), in addition to a fourth very low ambient level ground motion. Comparing the resulting absolute maximum base reactions and the mid-span structural displacements from updated model to the original model, it was concluded that the percentage changes were significantly high, therefore, the chance of original model being uncertain is very high for which model updating is an important and a highly effective technique, where possible, to generate a high confidence FE model that in best possible manner represents the behaviour of an actual structure.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Khan, Bahram

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/64262

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Khan, Bahram. Ambient modal identification, finite element model updating, and seismic analysis of bridges on Trans-Canada Highway. master's thesis, University of British Columbia, 2017. http://hdl.handle.net/2429/64262