Back to search

University of British Columbia

Development of a tower mill model using hardgrove mill tests

Abstract

dc:description

The gravity-induced low speed stirred milling technology, commonly referred to as tower mills, are widely used for fine grinding due to their high energy efficiency compared to conventional tumbling mills. Moreover, the lower operating cost, shorter installation period and simpler operating strategy make it attractive for many mines. Researchers have attempted to develop an ore characterization method and mathematical models for tower mills. However, there is no well-established universal fine material characterization method for both the grindability assessment and modeling of tower mills. In this study, a modified Hardgrove mill fine material characterization method was developed for the tower mill grindability assessment. The test result was integrated into the fmat breakage model, which incorporates both the effect of specific energy and particle size. Several industrial tower mill grinding circuit surveys were conducted to provide the information regarding the operating conditions and grinding product size distribution. The ore breakage model, the size specific energy level model, internal classification model and tower mill power models were integrated into a mass-size balance model to simulate the tower mill performance. A sensitivity analysis was conducted to simulate the tower mill performance under varied stirrer speed and media charge. Results obtained from the model and simulation work show that the developed model is capable of predicting the tower mill grinding product size distribution with adequate accuracy. The sensitivity analysis indicated a new opportunity to control the tower mill performance by adjusting the stirrer speed rather than by the conventional media addition strategy.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mining Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Huang, Monong

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/65026

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Huang, Monong. Development of a tower mill model using hardgrove mill tests. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/65026