Back to search

University of British Columbia

Heat transfer during run-out table bottom jet cooling of steel

Abstract

dc:description

Accelerated cooling on a run-out table in a hot mill governs the final microstructure and mechanical properties of thermo-mechanically controlled processed (TMCP) steels. Thus, it is crucial to delineate the heat transfer mechanisms and develop models adept to predict the temperature history of a steel strip or plate on a run-out table. In this work, controlled accelerated cooling experiments under transient conditions were performed on stationary steel specimens using an impinging bottom planar jet of water. Spatial sub-surface temperature history was recorded from 700 °C to below the saturation point of water. A two-dimensional inverse heat conduction algorithm was employed to quantify the heat fluxes and surface temperatures in order to obtain representative boiling curves. A range of water flow rates (160-300 l/min), water temperatures (10-40 °C) and jet inclinations (0-20 degrees) were investigated to examine the influence of process parameters on heat extraction rates. The obtained boiling curves show the presence of different heat transfer regimes with varying surface temperatures, i.e. nucleate boiling and transition boiling. Heat extraction rates increase with increasing water flow rates and decreasing water temperatures, particularly in the transition boiling region. Heat flux values show a strong dependence with respect to distance from the stagnation line, demarcating an impingement zone and a parallel flow zone. Characteristic boiling curves represent the two zones. A shoulder in the transition boiling region is observed to be an important feature in the boiling curves of the impingement zone. Based on the experimental data, empirical correlations have been proposed for the heat fluxes, considering the amalgamated effect of process parameters and distance from the stagnation line. Boiling curves for transient cooling have been constructed in the impingement zone and the parallel flow zone for a range of cooling temperatures relevant to the production of TMCP steels.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kashyap, Debanga

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/65203

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kashyap, Debanga. Heat transfer during run-out table bottom jet cooling of steel. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/65203