Back to search

University of British Columbia

Design, modeling and fabrication of polymer-based Capacitive Micromachined Ultrasonic Transducers (polyCMUTs)

Abstract

dc:description

Ultrasound imaging is the most widely used medical imaging modality in the world. Modern ultrasound systems still rely on the same piezoelectric-based technology since their creation in the 1930s. Despite their mature technology, they are expensive to fabricate, difficult to create 2D arrays and cannot be miniaturized. Capacitive Micromachined Ultrasonic Transducers (CMUTs) are considered the replacement of piezoelectric transducers given their high bandwidth, ease of integration with electronics and miniaturization. The main focus of this dissertation involves the simulation, fabrication and characterization of polymer-based CMUTs (polyCMUTs). A new fabrication process involving inexpensive polymer materials and minimum fabrication steps was developed. The fabrication procedure allows the creation of biocompatible ultrasound chips in a few hours and with costs well below $100 USD, having a performance comparable to current commercial devices. The fabricated polyCMUTs exhibit a phenomenon termed “pre-biasing”, which allowed the operation of polyCMUTs as passive devices (no external power needed). The first B-mode ultrasound image in the world created using polyCMUTs is also presented. As a future plan, the development of a low-cost wearable ultrasound health monitoring system is conceived.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gerardo Hernandez, Carlos Daniel

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/67620

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gerardo Hernandez, Carlos Daniel. Design, modeling and fabrication of polymer-based Capacitive Micromachined Ultrasonic Transducers (polyCMUTs). doctoral thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/67620