Back to search

University of British Columbia

Design and characterization of an actuator test fixture for diesel fuel injectors

Abstract

dc:description

The High-Pressure Direct Injection of Natural Gas in a diesel engine is one of the innovative solutions to reduce diesel engine pollutants. The quantity and quality of the fuel injected is highly depended on the spray pattern, which controls the air and NG fuel mixture in the combustion cylinder. Fuel release is regulated by a needle, that is linked to a solenoid actuator through a hydraulic system. An actuator with position feedback can control the spray pattern of a fuel injector by controlling the needle displacement of the injector. However, the relationship between the actuator displacement and injector needle displacement is unknown. Therefore, an Actuator Test Fixture (ATF) is designed that simulates the injection process of a typical hydraulically actuated fuel injector. It allows the researcher to study and ultimately model the relationship between actuator displacement and needle motion. In contrary to conventional fuel injectors, the ATF provides measurement access to all model parameters and allows their characterization. Thus, a characterized model is created that describes the relationship between the actuator displacement and ATF needle motion. The model of the ATF combines both the mechanical aspect of the components and the hydraulic mechanics of the fuel. There are two inputs to this model, the experimentally measured actuator displacement and experimentally measured supply pressure. ATF needle lift and control chamber pressures are the outputs of the model. The experimental-model comparison showed good agreement. The model is verified across several different operating points by varying the supply pressure and the actuator pulse duration to increase confidence in the experimental-model results. At high supply pressure, the model fits very well but as the pressure reduces the model starts to show discrepancy. This is likely due to un-modeled friction effects in the ATF. Nevertheless, the experimental-model control chamber pressures and needle lifts are very similar.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hossain, Syed Tanjid

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/68106

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Hossain, Syed Tanjid. Design and characterization of an actuator test fixture for diesel fuel injectors. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/68106