Back to search

University of British Columbia

Characterization of screw feeder compression and its effect on wood-chip cellulose accessibility

Abstract

dc:description

Wood-chip compression and enzyme impregnation are used as pre-treatment prior to refining to reduce energy consumption and improve pulp quality. This work aims at characterizing the effect of compression ratios on cellulose accessibility to the enzyme impregnation. This objective was achieved by quantifying the amount of glucose produced in the enzyme treatment of compressed wood-chips with a high-performance liquid chromatograph. A laboratory compressor and a controlled uniaxial load set-up were implemented to test different compression ratios and compression rates. The stress and strain data from the wood-chips compression was applied to torque equations to predict the power consumption of a screw feeder. The trial results showed that cellulose accessibility increased with compression ratio. High compression ratios were required to improve the hydrolysis rate significantly. Compression rate had no apparent effect on the cellulose accessibility. The improved accessibility is due to changes in morphology of the wood-chips as well as removal of the extractives. Microscopy imaging of wood-chip cross-sections showed buckling and fractures of the cell walls. Fractures lead to improved enzyme penetration and the reduction of chips size lead to higher available surface area. Using the compression data from the trials, screw feeder performance could be determined for different compression ratios. The calculations predicted that compressing at around 5:1 compression ratio achieved a good balance between power consumption, screw feeder capacity and improvement in cellulose accessibility.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Villalba Chehab, Miguel Esteban

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/68158

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Villalba Chehab, Miguel Esteban. Characterization of screw feeder compression and its effect on wood-chip cellulose accessibility. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/68158