Back to search

University of British Columbia

Improving the quality of crop residues by the reduction of ash content and inorganic constituents

Abstract

dc:description

Fuel pellet producers in Canada have started to consider alternative feedstocks that include agricultural crop residues. Yet, the higher ash content and inorganic constituents of crop residues can impose problems on the equipment, the quality of products, and the environment due to air emission. In this study, mechanical size fractionation in combination with leaching was conducted to improve the quality of crop residues by reducing the ash content to target value of 6% db following the applicable standard. Experimental results of mechanical size fractionation suggest that the finest fraction of ground crop residues had much higher ash contents than the coarser fractions. Results also indicate that size fractionation can reduce the need for leaching as ash removal technique, and it is most effective for corn stover when compared to canola straw and wheat straw. For the leaching tests, the leaching performance is affected by the leaching conditions whereas particle size can have some impact. Under the same leaching conditions, non-fractionated ground crop residues with larger average particle size had higher ash removal efficiency than the finest fraction of crop residues. Among the three species of crop residues, canola straw was found to have the best leaching performance, regardless of whether mechanical size fractionation was used prior to leaching. Canola straw had the highest ash removal efficiencies, K₂O removal efficiency (greater than 90%) and SiO₂ removal efficiency (more than 50%). The results also demonstrate that the effect of leaching temperature on K₂O removal efficiency is negligible while SiO₂ removal efficiency increases significantly as water temperature increases from 25 to 45 °C upon leaching for 12 h. A preliminary cost analysis was performed to estimate the total production cost (TPC) of agro-pellets based on different process designs with respect to the ash removal techniques. TPC for the base case of pellet production without ash removal pretreatment was estimated to be US$102/dry tonne (dt) pellets, and it would increase by 30% to US$133/dt for Option 1 (pretreatment by mechanical size fraction plus water leaching) and increase by 66% to US$169/dt for Option 2 (pretreatment by water leaching only).

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Peng, Yige

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/68207

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Peng, Yige. Improving the quality of crop residues by the reduction of ash content and inorganic constituents. master's thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/68207