Back to search

University of British Columbia

Surface engineering of wood fiber/filler networks

Abstract

dc:description

The hydrophilic property of cellulose substrates and their sensitivity to moisture limits their use in certain applications. The aim of this study is to enhance the barrier properties of cellulosic and lignocellulosic paper by utilizing environmentaly benign techniques. Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), and Atomic Layer Deposition (ALD) techniques were employed to deposit Dichlorodimethylsilane (DCDMS), tetrafluoromethane (CF₄), and aluminum oxide (Al₂O₃) on cellulosic and lignocellulosic papers, respectively. A wide range of fiber sizes from unrefined, 927 µm, to highly refined, 177 µm, were employed to make handsheets and the effect of the chemicals and the deposition techniques, mentioned above, on wettability and gas permeability of the handsheets was investigated. In this regard, the contact angles on handsheets prepared with unrefined fibers are significantly higher (140°-153°) than those of the refined ones (95°-120°) due to their higher surface roughness. However, on handsheets formed with refined fibers, although the treatments resulted in a hydrophobic surface, the water droplets absorb to the handsheets over time. It is also shown that at certain fiber size (561 µm) the water vapor transmission rate (WVTR) reaches its minimum value and further decrease of the fiber size does not significantly affect the WVTR. In terms of wettability, the cellulosic and lignocellulosic substrates coated by deposition of CF₄ resulted in the highest contact angles (120°-153°). However, regarding moisture barrier properties, the Al₂O₃ deposited substrates resulted in the lowest WVTRs (2.1 g·m-²·day-¹). Moreover, the impact of fabrication method was studied and the fiber drying mechanism during sheet formation was also elucidated. It was found that casting of a Micro Fiber (MF) suspension on hydrophobic substrates results in formation of optically translucent films with mechanical and barrier properties similar to micro and nano fibrillated cellulose films. The manufacturing of the latter is energy intensive and hence the new method has potential advantage. Finally, Janus (hydrophilic-hydrophobic) fillers were fabricated and the effect of filler’s dual functionality on barrier properties of handsheets loaded with Janus fillers was investigated. Silanization of handsheets substrates in conjunction with dual functionality of fillers results in formation of a superhydrophobic handsheet.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mirvakili, Mehr Negar

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/68210

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mirvakili, Mehr Negar. Surface engineering of wood fiber/filler networks. doctoral thesis, University of British Columbia, 2018. http://hdl.handle.net/2429/68210