Back to search

University of British Columbia

Shear design of pile caps and other members without transverse reinforcement

Abstract

dc:description

This thesis deals with the shear design of structural concrete members without trans verse reinforcement. The three major parts of this study are the transverse splitting of compression struts confined by plain concrete, the development of a rational design procedure for deep pile caps, as well as a general study of the shear transfer mechanisms of concrete beams. Three-dimensional compression struts that are unreinforced and confined by plain concrete, as occur in deep pile caps, were studied both analytically and experimentally. Based on the study results, bearing stress limits are proposed to prevent compression struts from transverse splitting. The maximum bearing stress depends on the amount of confinement, as well as the aspect ratio (height to width) of the compression strut. The proposed bearing stress limit was incorporated into a strut-and-tie model to develop a rational design procedure for deep pile caps. Two methods are proposed. The first method is a direct extension of two-dimensional strut-and-tie models used for deep beams. The second method is presented in a more traditional form in which “flexural design” and “shear design” are separated. The shear design is accomplished by limiting the bearing stress at the columns and the piles. The first method is more appropriate for analysis, while the second method is more appropriate for design. The rationality and accuracy of the proposed methods are demonstrated by the comparison with previous test results. In the final part of this study, the influence of bond between concrete and longitudinal reinforcement upon the load transfer mechanism of both deep members and slender members without stirrups are investigated. An interpretation of an important shear failure mechanism is presented.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhou, Zongyu

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/6970

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Zhou, Zongyu. Shear design of pile caps and other members without transverse reinforcement. doctoral thesis, University of British Columbia, 1994. http://hdl.handle.net/2429/6970