Back to search

University of British Columbia

Experimental investigations of step-pool channel formation and stability

Abstract

dc:description

The stability of steep streams with step-pool and cascade morphologies cannot be assessed using knowledge developed from lowland streams due to the structured nature of headwater streams. Thus there is a need for experimental studies examining the stability of such channels. The structuring of these channels occurs as a result of boulders and cobbles jamming across the width of the channel and the more typical pattern of armouring and imbrication, which results from a relatively low rate of sediment supply. To conduct such a study, new experimental techniques were developed and an artificial stream channel (flume) was designed and built. Channel width, bed grain size and channel gradient were varied and step-pool bedforms were created and subsequently destroyed. The variables governing the dimensions, frequency and form of step-pools were observed to be channel slope, bed grain size and channel width. Video records show that on occasion groups of larger stones moved together as a coherent group, forming a line of stones that locked together across the width of the channel. The failure of a step most frequently occurred when the downstream scour pool undermined the step-forming stones and was often associated with headward migrating instabilities. With smaller jamming ratios (channel width/D84steps —the diameter at which 84% of the step stones are smaller than) stable beds persisted at larger Shields numbers (ratio of shear stress to grain size), confirming that such channels do gain stability by having grains jam across their width. The failure of the bed was shown to be a stochastic process with nearly half of the failures occurring within the first minute following an increase in discharge, while 26% of the failures did not start to occur until tens of minutes or more after the flow was increased. Detailed bed morphology, channel grain size and flow velocity measurements suggest that a dimensionless hydraulic geometry approach is the best method of predicting flow velocities in headwater channels. The bed stability criterion, in combination with a dimensionless hydraulic geometry approach, provides a means of assessing the stability of mountain stream channels.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Geography
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zimmermann, Andre Eric

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/7016

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Zimmermann, Andre Eric. Experimental investigations of step-pool channel formation and stability. doctoral thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/7016