Back to search

University of British Columbia

Lithium extraction from brine with ion exchange resin and ferric phosphate

Abstract

dc:description

Lithium is an essential metal for our society. Notably, increasing energy storage system will necessitate much more lithium in the future. This study focused on brine deposit while lithium exists in hard rocks as well. Conventionally, solar evaporation has been used to concentrate lithium from brine, but it takes more than one year. Thus, a more rapid process is desired for the accelerating demand. Here, two types of adsorbent, ion exchange (IX) resin and heterosite ferric phosphate (FP), were studied in order to extract lithium selectively from brine rapidly. First, more than thirty IX resins were tested in lithium chloride solution. Out of the thirty, sulfonate, iminodiacetate and aminomethylphosphonate resins succeeded in extracting lithium with the value of 16.3–32.9 mg-Li/g. However, no resins could adsorb lithium from a mixed brine solution which contains other interfering cations like sodium. An aluminum loaded resin was also tested since some past studies had reported lithium selectivity with this material. Its adsorption density was 6.6 mg-Li/g and was higher than any other resins tested for the mixed brine in this study. Nevertheless, the overall results showed that the IX resins were not so suitable for lithium extraction from a mixed brine. Then, heterosite FP was investigated as an alternative adsorbent. The FP can adsorb lithium selectively with the addition of a reducing agent to form lithium iron phosphate. This study used thiosulfate (TS) and sulfite (SF) individually as a reducing agent. The maximum adsorption density was 45.9 mg-Li/g by SF reduction at 65 °C, which is almost the same as the theoretical value of 46.0 mg-Li/g. The maximum selectivity over sodium was 2541 by SF reduction at 45 °C. Additionally, it was confirmed that the FP could be recycled by persulfate oxidation without degradation. Finally, the kinetics was studied and fit using pseudo first-order and shrinking sphere model. The two models fit the experimental results and indicated that the lithium extraction reaction was chemical reaction controlled. Since the FP method was found to be promising, it is highly recommended that it should be developed further by using natural brine sources.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Fukuda, Hiroki

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/71058

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Fukuda, Hiroki. Lithium extraction from brine with ion exchange resin and ferric phosphate. master's thesis, University of British Columbia, 2019. http://hdl.handle.net/2429/71058