University of British Columbia
On the design of injection-locked frequency dividers for mm-wave applications
Abstract
dc:descriptionThis work presents the design and measurement results of two injection-locked frequency dividers (ILFDs) that are intended for mm-wave applications. The two prototypes are fabricated in a 65-nm CMOS process. The first direct-injection ILFD achieves a measured locking range of 24.5 GHz to 43 GHz while consuming 1.3 mW from a 0.48-V supply with a 0 dBm input injection power. The second ILFD design is based on the dual-injection multi-band architecture and as compared to the first design enhances the locking range by a factor of 2. The dual-injection ILFD achieves a locking range of 18 GHz to 61 GHz while consuming 1.8 mW from a 0.5-V supply with a 0 dBm input injection power. The design is optimized to improve the locking range and avoid in-band loss of lock which is a drawback of transformer-based higher order ILFDs. Furthermore, techniques such as shunt inductor peaking to reduce power consumption and dual-injection of the input signal through a distributed multi-order resonator to improve the locking range are explored and discussed. The best achieved locking range is 108.8 % at 39.5 GHz. The locking range obtained makes the divider suitable for integration in a multi-band mm-wave frequency synthesizer that can support international roaming.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Bodepu, Lakshmi Lavanya
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/72340