Back to search

University of British Columbia

Studies on lignin model compounds upgrading with in-situ glycerol aqueous phase reforming and the application for upgrading of ligneous material

Abstract

dc:description

Lignin and glycerol, residues of renewable biomass processing, have significant potential as fuels and chemicals. Lignin is a polymer of phenylpropanoids monomers and is a promising source of renewable hydrocarbons due to its relatively high C/O ratio compared to carbohydrates. However, it also requires hydrogenation for further valorization. Unfortunately, hydrogen currently comes primarily from petroleum, natural gas, and coal. Aqueous phase reforming (APR) of glycerol is a renewable source of hydrogen. This relatively low temperature reforming reaction is thermodynamically possible due to the presence of a C-O bond on every carbon of glycerol. This thesis explores the possibility of lignin depolymerization and fast pyrolysis oil (FPO) hydrogenation using renewable hydrogen from glycerol. This study was conducted with phenol as a model compound. Upgrading more complex materials such as FPO and native lignin from crushed mixed spruce, pine, and fir (SPF) pellets was also tested. Operating conditions were varied in order to understand reaction mechanisms. First, glycerol APR was conducted with Raney Ni® and it was found that glycerol APR occurred via parallel reactions of 1,2-propylene glycol and ethylene glycol. During glycerol APR, CO₂ and CH₄ were the dominant gaseous products while the produced hydrogen tended to react with glycerol, glycerol intermediates (direct methanation) or CO₂ (Sabatier) to form CH₄. The presence of phenol during glycerol APR increased the glycerol reaction rate and CO₂/CH₄ ratio due to the consumption of hydrogen, and produced cyclohexanol, cyclohexanone, and benzene. Phenol hydrogenation during in-situ glycerol aqueous phase reforming and phenol hydrogenation (IGAPH) occurred without the formation of molecular hydrogen as the hydrogen produced by glycerol APR was consumed by phenol before molecular hydrogen could form and desorb from the catalyst surface. The mechanism of phenol hydrogenation during IGAPH is hypothesized to follow the Langmuir-Hinshelwood mechanism. Hydrodeoxygenation (HDO) of phenol could be achieved using the combination of hydrogenation (Raney Ni® and Pt/C) and acid catalysts (Amberlyst-15 and H-ZSM-5). During FPO and SPF upgrading with Pt/C and H-ZSM-5, n-decane was used to separate nonpolar deoxygenated products from very reactive carbohydrates derivatives to prevent condensation reactions. Gasoline-like compounds were obtained from FPO and SPF upgrading.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dhewangga Putra, Robertus Dhimas

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/72795

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dhewangga Putra, Robertus Dhimas. Studies on lignin model compounds upgrading with in-situ glycerol aqueous phase reforming and the application for upgrading of ligneous material. doctoral thesis, University of British Columbia, 2019. http://hdl.handle.net/2429/72795