Back to search

University of British Columbia

Electrocatalytic CO2 conversion in flow reactors

Abstract

dc:description

Electrochemical reduction of CO₂ to value-added liquid fuels and chemical feedstocks is a sustainable approach to off-peak electricity utilization. The propagation of a CO₂ value chain through capture-conversion technology is bottlenecked by a lack of systems capable of catalytic CO₂ conversion with the efficiency, selectivity, robustness, and economic viability relevant to industry. The design of a CO₂ electrolyzer that can operate at current densities (J) > 200 mA/cm² , Faradaic efficiencies (FE) > 85%, voltages < 3 V is germane to this challenge. Improving the efficiencies, selectivities and current densities of CO₂ electrocatalytic systems are of scientific, environmental, and economic importance. In this thesis, I first demonstrate the development of a flow reactor that utilizes gas-phase CO₂ to achieve higher current densities (J = 200 mA/cm²) than is possible with conventional aqueous-fed systems. I use a silver catalyst dispersed on a gas diffusion layer to produce CO with high selectivity ( > 50%). I deploy a bipolar membrane which allows the use of non-corrosive conditions on either electrode, thereby prolonging cell lifetime. I then detail the design and use of an analytical device to compare the voltages for different CO₂ flow reactor architectures to identify which cell components should be optimized to most effectively lower the overall cell voltage. Analysis of the voltages across the components of three different flow reactor configurations highlights that the reactions at the anodes and cathodes are relatively efficient and that much of the voltage loss occurs at the membran. These results illuminate that a better understanding of membranes and the membrane-catalyst interface is needed. Finally, I demonstrate the incorporation of a molecular catalyst into a CO₂ flow reactor for efficient conversion of CO₂ to CO. Molecular catalysts are known to have high activity for the CO₂ reduction reaction but typically at low rates of conversion (i.e., < 30 mA/cm²). In this work, I show that a widely available molecular catalyst, cobalt phlalocyanine, can mediate CO₂ to CO formation in a flow reactor with high conversion rates commensurate with solid-state metal catalysts (ie., > 150 mA/cm² and FE > 85%).

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Salvatore, Danielle

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/74068

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Salvatore, Danielle. Electrocatalytic CO2 conversion in flow reactors. doctoral thesis, University of British Columbia, 2020. http://hdl.handle.net/2429/74068