Back to search

University of British Columbia

Experimental and numerical investigation of the effect of block-type support structure design on the thermal field within components fabricated by selective laser melting

Abstract

dc:description

The successful production of overhang features in the Selective Laser Melting (SLM) process requires additional structures, known as “support structures”. These structures provide mechanical support to overhang features and alter thermal fields within the produced components. Hence, the design of support structures impacts the development of in-situ thermal stress and component deformation. The present research combines experiments and numerical modelling to quantify the contribution of the support structure to the evolution of the thermal field in a cantilevered plate and, in turn, to investigate the relative role of heat transfer on component deformation. Series of build experiments were undertaken to investigate the effect of block-type support structure design on the deformation of the cantilevered plate. Two block-type support structures were designed for the overhang platform of a cantilevered plate. The designed samples were manufactured using SLM®500 machine located at Singapore Centre for 3-D Printing. The deformation of the overhang platform was measured using the Image Analysis technique. Next, a statistical analysis was performed to evaluate the relative impact of each design parameter on component deformation. Finally, a 2-D transient heat transfer model using the “layer agglomeration” approach was developed in the commercial package “ABAQUS” to perform a sensitivity analysis to investigate the impact of design parameters on heat transfer and the evolution of the thermal field in the support structure and the cantilevered plate. Numerical results demonstrated that the total contact area of teeth and the total support base area alter thermal fields within the produced components. It was predicted that increasing the area for conducting heat to the base reduces the peak temperature in the platform. Additionally, the vertical temperature gradient within the overhang platform decreased by increasing the total contact area of teeth. Moreover, increasing the total contact area of teeth produces a more uniform temperature field within the overhang platform, while the total base area was found to have a negligible impact on it. Also, the experimental case study was analyzed with the numerical thermal model suggested that the vertical temperature gradient and the peak temperature were reduced in the sample showing a lower amount of deformation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Khobzi, Arman
Contributors dc:contributor
  • Farhang Mehr, Farzaneh
  • Maijer, Daan M.
  • Cockcroft, Steve L.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/79044

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Khobzi, Arman. Experimental and numerical investigation of the effect of block-type support structure design on the thermal field within components fabricated by selective laser melting. master's thesis, University of British Columbia, 2021. http://hdl.handle.net/2429/79044