Back to search

University of British Columbia

Flow instabilities of PP filled with crosslinked EPDM rubber : using rheology to understand and control its occurrence

Abstract

dc:description

Thermoplastic vulcanizates (TPVs) are polymer blends that have good processability like their thermoplastic phase and good elasticity like their elastomeric phase. They consist of a high amount of dynamically cured rubber particles which make flow instability such as melt fracture intense and complicated. In this study a comprehensive rheological analysis is performed to gain a deep understanding of TPVs’ flow instabilities and identify the key parameters that control them. First, a thorough linear viscoelastic analysis is performed using several groups of TPVs which are systematically different in curing level, types of polymer components, and cured rubber content. All the TPVs show a non-terminal behavior reaching to an equilibrium modulus at low frequencies/high relaxation times. The equilibrium modulus, Gy, is an indication of the existence of yield stress and the linear modulus, G(t) can be modeled by a simple power-law model in the form of (𝐺(𝑡)−𝐺𝑦)∝𝑡−𝑝, where t is the time. A yield stress is also observed in the extensional tests and the relationship between extensional and shear yield stress is investigated. Due to the presence of oil and high amount of rubber particles, TPVs show wall slip. The multimode integral Kaye-Bernstein-Kearsley-Zapas (KBKZ) constitutive model considering wall slip is applied to study and model the TPVs’ non-linear behavior. To incorporate slip into the model, a new way is used by applying a fraction of imposed nominal strain to match the experimental data. Moreover, it is assumed that the material does not slip in the linear unyielding region i.e., for shear stresses less than the yield stress. Applying these assumptions, the KBKZ captures the experimental data well. Finally, to study processing parameters that affect the melt fracture phenomenon, capillary experiments are performed. It is observed that TPVs slip massively in capillary flow. Surface fracture of the TPVs gets better with shear rate indicating that the origin of melt fracture is different with that of TPV’s pure component. Yield stress controls flow instability of the TPVs and to overcome and/or mitigate melt fracture, high shear rates are needed to cause flow and eliminate unyielded regions in the complex geometries used in real processing.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ghahramani, Nikoo
Contributors dc:contributor
  • Hatzikiriakos, Savvas Georgios, 1961-

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/79810

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ghahramani, Nikoo. Flow instabilities of PP filled with crosslinked EPDM rubber : using rheology to understand and control its occurrence. doctoral thesis, University of British Columbia, 2021. http://hdl.handle.net/2429/79810