Back to search

University of British Columbia

Smooth time optimal trajectory planning for industrial manipulators

Abstract

dc:description

This work proposes and demonstrates a strategy for planning smooth path-constrained time-optimal trajectories for manipulators. Such trajectories are obtained by limiting the actuator jerks required by the planned motion. Existing planning strategies incorporate the smoothness requirement either as smoothness of the actuator torques or as smoothness of the joint trajectories. The smoothness requirement is desirable for reducing strain on robot actuators while still requiring low cycle times. In this work, the trajectory smoothness is defined in the phase plane and the planning observes the limits on the actuator jerks. The solution proposed for determining the optimal trajectories consists of approximating the time optimal control problem by a nonlinear parameter optimization problem which is solved using the flexible tolerance method. It is shown that the approximate solution converges to the time optimal motion when the actuator jerks become very high. A number of simulations are performed to demonstrate the proposed strategy. These simulations show that actuator jerk limits have a negative impact on robot motion time, but they do not give any indication about robot trajectory feasibility. This aspect is studied through further simulations and experiments on an industrial robot. The results of this work show that the tracking accuracy is directly related to the actuator jerk limits. Therefore, it is necessary to impose such limits when planning feasible optimal trajectories. Finally, the performance of the smooth time optimal motion is compared to the performance of both the non-jerk limited optimal trajectory, as well as a smooth quintic trajectory. For similar actuator jerks and controller effort, the smooth path-constrained time-optimal trajectory results in a significantly shorter motion time with nearly the same tracking accuracy as a quintic polynomial. Based on the results in this work, actuator jerk limits are shown to provide an improved method of achieving a compromise between high tracking accuracy, smooth joint behaviour, and optimal motion time.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1998

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Constantinescu, Daniela

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/8051

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Constantinescu, Daniela. Smooth time optimal trajectory planning for industrial manipulators. master's thesis, University of British Columbia, 1998. http://hdl.handle.net/2429/8051