University of British Columbia
Simulation and experimental verification of universal high frequency induction machine model for arbitrary stator winding connections
Abstract
dc:descriptionImplementing a universal high frequency induction machine model for arbitrary stator winding connections is crucial to determine and investigate the electromagnetic interference (EMI) issues concerning stator winding reflected wave overvoltage and bearing discharge current. It is also fundamental in determining proper motor dielectric insulation and optimal design of dv/dt filters. To design and characterize high frequency induction machine model accurately, the machine’s Differential Mode (DM) and Common Mode (CM) impedance characteristics should be analysed within the interested frequency range. The high frequency machine model should be able to represent all the possible stator winding connections (e.g., Y or Delta connections) to create a comprehensive universal high frequency machine model. In this thesis, a 7.5 HP dual-voltage 9-terminal/lead Baldor induction machine is selected for the high frequency machine modeling study due to its availability of different stator winding configurations. There are four possible types of stator winding connections of the Baldor induction machine as Single Y, Single Delta, Series Y, and Parallel Y winding configurations. Considering the machine high frequency phenomena under study and the limitation of the measurement equipment (impedance analyzer or frequency response analyzer), this thesis is focused on high frequency machine model with frequencies up to 10 MHz. The frequency ranges are subdivided into three sections: low frequencies (100 Hz – 10 kHz), mid frequencies (10 kHz – 500 kHz), and high frequencies (500 kHz – 10 MHz). The considered high frequency range is limited up to 10 MHz due to the complicated harmonics present above that limit generated by the output-controlled AC (Alternative Current) step voltages of the motor drive. There are also modeling complications with the capacitive and inductive couplings, extracted from 2D finite element simulations, as well as analytically estimated resistive winding losses in the frequency ranges above 10 MHz. The proposed machine model can represent the machine in arbitrary winding configurations with a simple, yet accurate circuit model and a straight-forward model characterization method. The proposed high frequency machine model is verified using hardware experiments on the Baldor induction machine connected with a commercial ABB motor drive, ACS150. The DM and CM currents are measured from the hardware setup and compared to the simulated DM and CM currents from the proposed high frequency machine model. The comparison of the simulated and hardware measured results verified the accuracy of the proposed high frequency machine model.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Electrical Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Fani, Aria
- Contributors dc:contributor
-
- Wang, Liwei
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/80677