Back to search

University of British Columbia

Development and analysis of membrane contactor for resource recovery from wastewater

Abstract

dc:description

Dissolved ammonia and methane can be present in wastewater, particularly in effluents from anaerobic bioreactors. Recovery of these compounds from wastewater has garnered interest due to their potential as a fertilizer (NH₃) and biofuel (CH₄). Isothermal Membrane contactors (MCs) are effective in recovering both resources from wastewater but possess drawbacks such as (i) production of overly acidic product and potential for fouling (for NH₃) (ii) low-quality biogas and high energy consumption (for CH₄). In this thesis, I address each of these challenges. Firstly, I study the impact of acid strength (H₂SO₄) on NH₃ recovery by experimentally validating an enhanced mass transfer model that describes the transfer resistance of NH₃ arising from an incomplete acid-base reaction at the draw-membrane interface. The model is then extended to establish that (1) a trade-off exists between acid strength and NH₃ flux, (2) acid concentration can be optimised to achieve usable ammonium salt as fertilizer. To study the extent of fouling and its effect on NH₃ recovery, I employ anaerobically digested food wastewater as feed. With >95% NH₃ recovery, minimal membrane fouling was observed. By performing MCs in isothermal and non-isothermal modes, I identified the deterministic role of transmembrane water vapor flows on fouling. Subsequently, >70% NH₃ recovery was observed from the fouled membranes, indicating process robustness of MCs even when fouled. I then present a solvent-based membrane contactor for dissolved CH₄ recovery. Using a fabricated omniphobic membrane, I demonstrate ≥90% CH₄ recovery from CH₄-saturated wastewater. A comparative energy analysis suggests that this process can enable net energy production, which outperforms other dissolved CH₄ recovery techniques. Finally, using experiments and a mass transfer model, I show that the amount of recovered CH₄ is higher at lower temperatures, flux across the membrane is unaffected by presence of CO₂ (another constituent of biogas), and the process has a considerable fouling tolerance. I also show that producing a biogas with a higher CH₄ fraction is attainable from anaerobic effluents. The findings from this thesis aids advances in MCs for NH₃ and CH₄ recovery by considering the impact of performance limiting parameters on product yield, quality, and membrane performance.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dutta, Abhishek
Contributors dc:contributor
  • Lee, Jongho

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/82732

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dutta, Abhishek. Development and analysis of membrane contactor for resource recovery from wastewater. doctoral thesis, University of British Columbia, 2022. http://hdl.handle.net/2429/82732