Back to search

University of British Columbia

Prediction of grain structure and texture evolution after high temperature extrusion of aluminum alloys

Abstract

dc:description

To engineer the mechanical response of the material, it is crucial to predict the microstructure after thermomechanical processing and relate properties to the microstructure. In this study, the relationship between the features of the deformed state after axisymmetric extrusion of aluminum at high temperatures (e.g., the subgrain size distribution and the disorientation distribution) and the final recrystallized texture was investigated. It aims to systematically change the features of the deformed state by generating different initial synthetic microstructures and using them as inputs for a phase field model to predict the recrystallized texture. The characteristics of the deformed state and the recrystallized state were analyzed for extruded 3XXX aluminum samples with two different homogenization heat treatments. The subgrain size distribution and disorientation distribution in different texture fibres of the deformed state, i.e., <001>||ED and <111>||ED, were extracted to construct a baseline condition. After verifying that 2D simulations could be used to capture the essential phenomena in 3D, the role of the microstructural features was investigated using 2D simulations. First, the subgrain size distribution and disorientation distribution were changed from baseline condition by ±50% for individual grains with <001>||ED or <111>||ED. Second, for a mixture of grains with <001>||ED and <111>||ED orientations, <111>||ED baseline condition was used, then subgrain size distribution and disorientation distribution were changed by ±50% for <001>||ED grains. Third, an input microstructure from experimental EBSD measurements was simulated. For the first scenario, a narrower distribution and a wider disorientation distribution resulted in a larger final average subgrain size which was rationalized based on the evolution of these microstructural features. For the second scenario, the tail of the subgrain size distribution and the width of disorientation distribution within <001>||ED was found to have a large impact on the final texture. This was explained by the probability of large grains with high angle disorientation in <001>||ED fibres growing preferentially to pinch-off grains with <111>||ED orientations. For the third scenario, only <001>||ED volume fraction could be predicted accurately compared to the experiment. Possible sources of error were identified and discussed.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Khajezade, Ali
Contributors dc:contributor
  • Poole, W. J. (Warren J.)
  • Militzer, Matthias

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/82842

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Khajezade, Ali. Prediction of grain structure and texture evolution after high temperature extrusion of aluminum alloys. doctoral thesis, University of British Columbia, 2022. http://hdl.handle.net/2429/82842