Back to search

University of British Columbia

Materials characterization of solution-processed CuIn(S,Se)₂ absorber films for use in thin-film solar cells

Abstract

dc:description

Global commitments to reduce fossil-based carbon emissions and invest in clean energy technologies have brought about an increased interest in solar photovoltaic (PV) technology. Current market-leading and top-performing solar panels are fabricated through expensive, time and energy-intensive vacuum-based fabrication routes, incurring high costs. In contrast, liquid-based solution processing techniques offer enormous potential for cost reduction but must improve performance to become competitive on the market. To this end, the present work analyses a liquid-based fabrication method for CuIn(S,Se)₂ – short CISSe – absorber films, aiming to improve the quality and performance of the produced materials. The study includes the use of a non-toxic alternative chemical etchant and a novel component design in the proposed fabrication system, as well as an investigation of the effect of different elemental compositions in molecular ink precursors. This is achieved by producing a sample batch of CISSe absorber films using the primary experimental variables: chemical etchant and precursor composition respectively. CISSe absorber films are fabricated using the solution-based molecular ink approach at four different compositions, defined by the elemental ratio Cu/In = 0.7, 0.85, 1.0, and 1.15, and compared in a non-etched, standard-etched (KCN), and alternative-etched ((NH₄)₂S) iteration for each composition. Materials characterization is done using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses. It is found that this fabrication method can produce high quality absorber films with the desired CISSe material at all respective compositions. Increasing size of crystal grains was observed as the Cu/In ratio was increased up to 1.15 (~7.5 μm average grain size). At Cu/In ratios 1.0 and above, detrimental secondary phases of copper selenide compounds were found to be present. Both the (NH₄)₂S and KCN etchants were found to effectively etch these secondary phases. This work strongly supports the use of the presented solution-based fabrication method, validating both the alternative furnace system design and benign chemical etchant alternative. Future works should use this research as a base with primary focus on completion of a complete CISSe solar cell device for further study.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • McIntosh, Noah
Contributors dc:contributor
  • Uhl, Alexander R.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/83152

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

McIntosh, Noah. Materials characterization of solution-processed CuIn(S,Se)₂ absorber films for use in thin-film solar cells. master's thesis, University of British Columbia, 2022. http://hdl.handle.net/2429/83152