Back to search

University of British Columbia

Fluid flow and combustion in rotary kiln

Abstract

dc:description

Thermal processing of minerals and materials within rotary kilns involves energy generation by combustion and its subsequent heat transfer (by turbulent diffusion and radiation) to the charge (the bed) and refractory walls. Thus, by influencing heat transfer, flame behavior and the combustion process can significantly influence processing conditions. Proper burner design and flame control ensure high fuel utilization efficiency, long life time of the refractory lining.(kiln walls), low pollutant emissions and high product quality. In the current work, a simplified computational fluid dynamics model of combustion aerodynamics and heat transfer within rotary kilns was developed and validated against thermal measurements from a 0.41 m I.D. by 5.5 meter long pilot rotary kiln. The validation program demonstrate the model's ability to capture the flame phenomena at the pilot scale. From this basis, the model was applied to simulate flame conditions for a 4 m I.D. by 40 m long kiln, which is more typical of the industrial scale. The effects of burner configuration and primary air ratio on the flame shape and heat transfer were investigated. These results suggest that flame length may be effectively increased by reducing the momentum of the fuel jet. The results suggest that, the primary air ratio will have marginal effect on flame behavior which is more strongly influenced by the momentum of the primary jet. Results are presented which demonstrate the effect of firing conditions; e.g. momentum of the primary jet and primary air ratio, on flame characteristics and, more importantly the axial distribution of heat transfer to both the bed and kiln refractory. From this basis, operators are given guidance on how the controllable burner parameters might be adjusted to reduce wall "hot spots"; and alleviate product quality and control of agglomeration/ringing problems. The work also indicates that for typical gas-fired operations, buoyancy effects should have little influence on flow and combustion within the hot-end of the kiln.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1998

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alyaser, Abdelmonem H.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/8426

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Alyaser, Abdelmonem H.. Fluid flow and combustion in rotary kiln. doctoral thesis, University of British Columbia, 1998. http://hdl.handle.net/2429/8426