Back to search

University of British Columbia

Evaluation of various carbon cloth as biomass support media for bioaugmentation of anaerobic digestion of municipal sludge

Abstract

dc:description

Municipal wastewater sludge disposal is a growing global environmental issue due to high concentrations organic pollutants and pathogens. Anaerobic digestion is a widely adopted process for treating municipal sludge and producing biogas as renewable energy. However, the complex structure of sludge and the difficulties retaining slow-growing archaea in bioreactors, leads to low organic conversion efficiency and lower biogas yield in anaerobic digestion. To address these issues, the present research develops a side-stream incubator reactor system that grows a dense population of syntrophic bacteria and archaea, with attention to microbial syntrophy. The research is divided into three main parts: developing a high-performance activated carbon cloth that retains beneficial cultures; a novel incubator using carbon cloth; and an effective bioaugmentation strategy to transfer microbial cultures from the incubator to a Control reactor (conventional digester, baseline scenario). To synthesize high-performance activated carbon cloth, two methods were implemented: a two-step activation process (acid pretreatment and air calcination at 525 ± 25°C), and metal-impregnation of carbon cloth that incorporated nickel and/or iron nanometals. Although metal impregnation enhanced the electrical conductivity however reduced the surface area for microbial attachment. The activated carbon cloth had a 435-times larger pore size area than the commercial carbon cloth, leading to improved microbial colonization and methane production rates in preliminary biochemical methane potential assays. Next, the activated carbon cloth braided ropes were used in a continuous-flow incubator reactor, with a packing density of 1.48 g activated carbon cloth/g volatile solids of substrate, determined from the preliminary assays. The developed incubator system produced a continuous supply of active microbial culture for bioaugmentation of the Control for process improvement. Finally, two bioaugmentation strategies, pellet bioaugmentation and liquid bioaugmentation, were tested to transfer microbial cultures from the incubator system to the Control digester. Pellet bioaugmentation outperformed the liquid bioaugmentation with 33 and 88% daily biogas increases at digester hydraulic retention times of 20 and 10, respectively, with a 2% higher methane compared to the Control reactor. Also, the pellet bioaugmentation strategy enhanced the Control digester's resilience to stress induced at higher organic loads and can be retrofitted to existing wastewater treatment plants.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kumar, Vikas
Contributors dc:contributor
  • Eskicioglu, Cigdem

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/84643

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kumar, Vikas. Evaluation of various carbon cloth as biomass support media for bioaugmentation of anaerobic digestion of municipal sludge. doctoral thesis, University of British Columbia, 2023. http://hdl.handle.net/2429/84643