Back to search

University of British Columbia

Experimental and computational investigation of inclined jets in a crossflow

Abstract

dc:description

The flow field characteristics of four different geometries of a row of square jets in a crossflow at velocity ratios relevant to gas turbine film cooling applications have been examined using experimental and computational methods. The geometries considered were: long and short entry length streamwise-inclined jets, spanwise-inclined jets, and compound-angle jets. Mean velocity and turbulence measurements were made using a three-component LDV system. Jet penetration, spreading, and film cooling effectiveness were measured using a flame ionization detector. Numerical simulations were performed using three different turbulence models: the standard κ — ε model, Menter's baseline blended κ — ε/κ — ω model, and Menter's shear stress transport model. The flow field at the jet exit is strongly influenced by the crossflow, as well as by the inlet conditions at the entrance to the jet orifice. At low velocity ratios the jets do not penetrate beyond the upstream boundary layer thickness. As the velocity ratio increases, the jet penetrates beyond the boundary layer resulting in stronger interaction with the crossflow. Considerable anisotropy of the turbulent flow field is observed. The film cooling effectiveness is best at the lowest velocity ratio as the jet is deflected strongly towards the floor of the wind tunnel, although the improvement is more significant for the streamwise injection case. At the highest velocity ratio the spanwise jets provide the best film cooling effectiveness but provide increased blockage to the crossflow. The results of the preliminary computational analysis indicate that the flow field produced by each of the geometries provides a serious challenge for numerical modelling. Mean velocity gradients and turbulence kinetic energy levels are typically underpredicted by the computations due to the assumption of equilibrium turbulence inherent in the models. The use of an isotropic eddy viscosity model must be reconsidered in light of the measured turbulence anisotropy and generation of turbulent shear stresses from velocity gradients not included in the standard eddy viscosity formulation.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1998

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Findlay, Matthew J.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/8493

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Findlay, Matthew J.. Experimental and computational investigation of inclined jets in a crossflow. doctoral thesis, University of British Columbia, 1998. http://hdl.handle.net/2429/8493