Back to search

University of British Columbia

Water jet impingement in run-out table cooling

Abstract

dc:description

cooling process on a run-out table is a critical step that governs the final microstructure and the mechanical properties of the produced steels. In this research, we use a more recent method for obtaining the thermal history on the plate surface, which is the infrared thermal imaging technique. This technique has the advantage of capturing the surface temperature history remotely and with no contact with the plate. In this work, controlled cooling experiments under transient conditions were conducted on a hot stationary plate using an impinging top circular nozzle and a thermal camera to capture the temperature history. The measurements from the thermal camera (conducted in Abu Dhabi University) are compared with the conventional thermocouple measurements (University of British Columbia). The comparisons showed that the infrared camera gives more complete picture of the thermal history and more accurate results than thermocouple measurements. Reasons for the inaccuracy of the thermocouple (T/C) measurements include T/C response time, and distortion of the thermal field by the method of installation. These reasons are discussed in detail in the thesis. Additionally, we introduce a transient multiphase CFD numerical simulation to obtain the temperature profile on the plate surface and compare it with the experiments conducted. The numerical simulation was done using the Ansys-Fluent CFD software. A two-dimensional model was used with a highly intensive mesh near the wall region based on the wall y+ number. The surface temperature graphs for both measurements and simulation are compared at different radial locations (stagnation zone and parallel zone). Additionally, the obtained CFD results were verified and compared with the surface temperature of the experimental data.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alakbari, Abdullah Al
Contributors dc:contributor
  • Gadala, Mohamed
  • Grecov, Dana

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/85594

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Alakbari, Abdullah Al. Water jet impingement in run-out table cooling. master's thesis, University of British Columbia, 2023. http://hdl.handle.net/2429/85594