Back to search

University of British Columbia

In-plane shear capacity of 3-panel BEHLEN frameless wall system under axial compression load

Abstract

dc:description

BEHLEN frameless building is a novel structural system for low-rise, large-span building applications. The BEHLEN frameless building is made of specially corrugated cold-form steel wall, footing channels, boundary columns, ceiling plates, arched roof, and optional convex. The pre-manufactured steel components are then assembled using bolts on site. BFWS is the prime structural component to resist both vertical and lateral loads in the BEHLEN frameless building. To date, BFWS has been tested under axial compression, lateral shear, and out-of-plane bending moment. However, the capacity of BFWS subjected to combined compression and shear loads has not been examined. This thesis presents a study to evaluate the in-plane shear capacity of 3-panel BEHLEN frameless wall system (BFWS). Four full-scaled BFWS with different wall thicknesses were tested in the laboratory. Specimens were subjected to monotonic and cyclic shear displacement under constant compression loads. Damage patterns of the 3-panel BFWS were observed. The observed shear resistance – lateral displacement curves were recorded. The damage patterns were sudden interactive buckling, deformation of footing channels, and the slotting of bolt holes along panel seamlines. A detailed finite element model (FEM) was developed in Abaqus. The FEM was validated using the experimental results. The results show that the FEM was able to simulate the failure patterns and capacities of the 3-panel BFWS. Further parametric study including variation of wall thickness, wall height, and axial compression was investigated using the validated FEM. The maximum in-plane shear resistance Vₘ, and the damage patterns of the specimens were reported. The experimental and simulation results are used to estimate the maximum shear capacity of 3-panel BFWS under different levels of compression loads. The results can be used to optimize the design of the 3-panel BFWS under combined axial and shear loads.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Huang, Jingfei
Contributors dc:contributor
  • Yang, Tony T. Y.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/86087

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Huang, Jingfei. In-plane shear capacity of 3-panel BEHLEN frameless wall system under axial compression load. master's thesis, University of British Columbia, 2023. http://hdl.handle.net/2429/86087