Back to search

University of British Columbia

A comparative study of the ferric-ferrous and potentiostatic dissolution of chalcopyrite using scanning electrochemical microscopy and surface wetting analysis

Abstract

dc:description

The current work investigates the dissolution of chalcopyrite (CuFeS₂) under two different leaching scenarios using scanning electrochemical microscopy (SECM): (1) leaching in the presence of ferric-ferrous ions (“ferric leaching”) and (2) leaching by the application of a potential without ferric-ferrous ions (“potentiostatic leaching”). Ferric leaching processes have reported a solid elemental sulfur product layer that impedes chalcopyrite dissolution. However, potentiostatic leaching tests have reported a copper sulfide layer as the product that forms during dissolution in the absence of ferric-ferrous. In this work, we used the SECM in two ways: (1) to detect the species released during dissolution in the two scenarios using tip CVs and (2) map the conductivity of the surface under the different conditions. Four ferric-ferrous molar ratios in sulfuric acid solution were used in the ferric leaching scenario: 1:1, 10:1, 100:1 and 1000:1, and the chalcopyrite mixed potentials from these tests were applied to a separate sample potentiostatically in pure sulfuric acid. The tip CVs identified Cu²⁺ and Fe²⁺ released in both leaching scenarios. However, in the potentiostatic leaching case, a CuS product was determined to form at the tip, which was not observed in the ferric leaching case. Diagnostic tests determined that the CuS formed from a copper-thiosulfate complex, with the thiosulfate ion being the intermediate soluble sulfur species released during chalcopyrite dissolution. Once, the CuS-type layer forms on chalcopyrite, in the presence of ferric, it is further oxidized to form a sulfur-rich copper-deficient layer. Contact angle measurements show that the chalcopyrite surfaces produced during ferric leaching are relatively more hydrophobic compared to the potentiostatically leached samples. This is because the sulfur-rich layer in the ferric leaching scenarios is hydrophobic in nature. CuS, from the potentiostatic case, has more holes than electrons and is perceived to have a net positive charge on its surface. These holes attract the water dipole with the negatively charged end oriented toward the surface to flatten the droplet, yielding a lower contact angle and enhancing hydrophilicity. These results support the understanding that mechanistic outcomes from amperometric techniques cannot ultimately be used to explain the results from industrial ferric leaching processes.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Danso-Dodoo, Nana Abena Owusua
Contributors dc:contributor
  • Gyenge, Előd
  • Asselin, Edouard

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/86290

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Danso-Dodoo, Nana Abena Owusua. A comparative study of the ferric-ferrous and potentiostatic dissolution of chalcopyrite using scanning electrochemical microscopy and surface wetting analysis. master's thesis, University of British Columbia, 2023. http://hdl.handle.net/2429/86290