Back to search

University of British Columbia

Hydrodynamic and scale-up studies of spouted beds

Abstract

dc:description

The scaling relationships proposed by Glicksman (1984) for fluidized bed scale-up have been modified to provide a full set of scaling parameters for spouted bed scale-up. A force balance for particles in the annulus region leads to addition of two non-dimensional parameters, the internal friction angle (φ) and the loose packed voidage (ε₀) to the original Glicksman scaling relationships. Experimental verification of the full set of modified scaling parameters was conducted, first in a series of small spouted beds, then in larger columns up to 0.914 m in diameter, and finally in a pair of high temperature (500 °C) beds. Both viscous and inertial forces were important for the conditions investigated so that no simplifications could be made to the full set of scaling parameters. It is demonstrated that the full set of modified scaling parameters is valid for spouted beds when all dimensionless parameters are matched between the prototype and model beds. A fibre optic probe was used to measure voidage profiles in spouted beds of diameter 0.152 m. The voidage in most of the annulus was found to be somewhat higher than the loose-packed voidage and increased with increasing spouting gas flow rate, contrary to usual assumptions. The voidage decreased with height in the core of the fountain for low spouting gas flow rates, but first increased with height and then decreased towards the top of the fountain at higher gas flow rates. Radial profiles of local voidage were roughly parabolic in the lower portion of the spout and blunt in the upper portion. The same fiber optic probe was also used to measure spout diameters based on significantly higher counts of output electric pulses in the spout region than in the annulus. The flat wall of semi-cylindrical spouted bed columns was found to cause considerable distortion of spout shapes which became approximately semi-elliptical. The often-used McNab (1972) equation was found to underestimate the spout diameters in a full-column, with an average deviation of 35.5%. A second fibre optic probe system was used to measure profiles of vertical particle velocities in the spout and fountain regions. In addition, a fibre optic image probe was employed to measure particle velocity profiles in the annulus. In the spout, radial profiles of vertical particle velocities were near Gaussian in shape. Particle velocities along the spout axis in a half-column were 70% lower than in a full-column of the same diameter as the half-column under identical operating conditions. In the half column, particle velocities adjacent to the front plate were approximately 24% lower than a few millimeters away for the conditions studied. In the annulus region, there was a 28% difference between particle velocities adjacent to the column wall and those only 2 mm away. Measurements of pressure profiles and gas flow distributions in the annulus were carried out, while the influence of elevated pressures on bed hydrodynamics was also examined.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1995

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • He, Yan-Long

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/8724

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

He, Yan-Long. Hydrodynamic and scale-up studies of spouted beds. doctoral thesis, University of British Columbia, 1995. http://hdl.handle.net/2429/8724