Back to search

University of British Columbia

Investigation of solid digestate-derived biochar as effective adsorbent for removal of polycyclic aromatic hydrocarbons (PAHs) from industrial wastewater

Abstract

dc:description

The integration of pyrolysis after anaerobic digestion offers the benefits of waste-to-resources and maximizing energy recovery from waste materials. The pyrolysis process converts the solid digestate into valuable products, including biochar. In this study, we examine the composition of primary solid digestate (PSD) and secondary solid digestate (SSD) from an on-farm anaerobic digester. The physiochemical properties of the biochar was analyzed to understand the impact of precursor characteristics on biochar properties. Both PSD and SSD contained high lignin content, but the SSD has higher ash content compared to PSD. The results revealed that biochar PSD-B500 exhibited superior characteristics with a higher specific surface (249 m²/g), micropore volume (0.106 cm³/g) and acidic functional groups (6.64 mmol/g) than SSD biochar (SSD-B500) (31.9 m2/g, 0.0019 cm3/g, 5.39 mmol/g). This suggests that PSD is a favourable feedstock for producing high-quality biochar. Adsorption is a promising technique for water treatment and has garnered attention, particularly in utilizing adsorbents derived from waste materials. The effectiveness of the two adsorbents was analyzed by investigating the removal of pollutants called polycyclic aromatic hydrocarbons (PAHs). Four compounds were selected: phenanthrene (PHEN), anthracene (ANT), fluoranthene (FLUO) and pyrene (PYR). The estimated adsorption capacities of PHEN, ANT, FLUO and PYR are 2991, 6059, 15590 and 7262 μg/g onto PSD-B500, which were 46-90% higher than SSD-B500. Thermodynamic studies demonstrated that PAHs adsorption onto PSD-B500 was spontaneous and feasible. Leachability of loaded biochar confirmed the strong bonding of PAHs to both biochars, with < 3% release ratio. The effect of pH, dosage, and humic acid had a limited effect on the percentage removal of PAHs using PSD-B500. The performance of PSD-B500 was analyzed under various conditions representing common produced water compositions. The results indicate that PSD-B500 is not significantly affected by the presence of salts and formic acids. However, notable reduction in removal efficiencies was observed with presence of Ca²⁺, Zn²⁺, Cu²⁺, and Pb²⁺. The comparative analysis between PSD-B500 with commercial activated carbon over three adsorption cycles, highlights the limitation of inactivated biochar, as PSD-B500 shows a significant decrease (~30%) in the efficiency after the first cycle compared to activated carbon.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mohd Nasir, Amirah Syafika
Contributors dc:contributor
  • Bi, Xiaotao
  • Li, Loretta Y.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/87463

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mohd Nasir, Amirah Syafika. Investigation of solid digestate-derived biochar as effective adsorbent for removal of polycyclic aromatic hydrocarbons (PAHs) from industrial wastewater. master's thesis, University of British Columbia, 2024. http://hdl.handle.net/2429/87463