Back to search

University of British Columbia

An extended micromechanical model of compacting fibre beds

Abstract

dc:description

An important step in the processing of unidirectional pre-impregnated composite laminates is debulking and compacting the layers to remove gaps between and within the laminae. During this step, the resin is heated up and can flow relative to the fibre bed. Consequently, the fibre bed’s elastic properties play a significant role in determining the pressure withstood by the fibre bed versus the resin, as well as in determining the resulting shear deformation of the prepreg. The flow of resin through the fibre bed is typically modeled by Darcy’s Law, and the fibre bed properties of interest are defined based on the fibre bed compaction curve, a stiffening curve relating the fibre bed's normal stress to its normal strain or volume fraction. The prevalent fibre bed model in literature is a simple analytical formulation that predicts the transverse modulus E_33, but it ignores the fibre bed's shear modulus. This thesis presents three main parts: First, a modified representative volume element is introduced, allowing for simultaneous prediction of the full elastic matrix with correlated transverse and shear moduli, both matching experimental measurements. This model represents all elastic properties through a single, coherent mechanical approach. Second, a statistical representation of the fibre bed is presented, incorporating inherent variations in fibres using the extended fibre bed model. This model establishes a direct connection between the material's mechanical response and the fibre bed architecture, including volume fraction and fibre waviness distribution. Results show that the shear modulus is more susceptible to variation due to non-homogenous fibre interactions creating nonuniform deformation during compaction. Third, classical micromechanical models' inadequacy in simulating prepreg behavior during initial resin curing stages is addressed. The extended fibre bed model is implemented, incorporating resin properties and enabling the calculation of the full elastic matrix for the prepreg as a unified system evolving based on compaction level and resin mechanical properties during curing. Coupling the prepreg micromechanical model with macro-level models provides a multiscale simulation framework necessary for accurate prediction of prepreg behavior throughout processing stages, from pre-gelation to solidified resin.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Arbabi, Nasser
Contributors dc:contributor
  • Poursartip, Anoushiravan
  • Vaziri, Reza, 1961-

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/87680

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Arbabi, Nasser. An extended micromechanical model of compacting fibre beds. doctoral thesis, University of British Columbia, 2024. http://hdl.handle.net/2429/87680