Back to search

University of British Columbia

An in-vitro assessment of the accuracy of fitting and occlusal surfaces of digitally and conventionally fabricated occlusal appliances

Abstract

dc:description

Purpose: This study compared the accuracy of the fitting and occlusal surfaces of digitally printed and conventionally fabricated occlusal appliances. Materials and Methods: Ten intraoral scans (TRIOS 3, 3Shape) of zirconia master models (Zr MM) were sent to a commercial dental laboratory to design and fabricate Digital Occlusal Appliances (DOAs) using a 3-D printing technology. Ten alginate impressions of the same zirconia models were utilized by the commercial dental laboratory to fabricate Ten Conventional Occlusal Appliances (COAs). The lab technician was instructed not to carry out any adjustments following manufacturing of the appliances. Benchtop scans were obtained of the DOAs and COAs fitting and occlusal surfaces to determine the accuracy compared to the benchtop scan of the Zr MM. In addition, linear measurements of the scans were compared for both DOAs and COAs. Results: A statistically significant difference in the individual tooth fit was observed; DOAs showed significantly higher conformity of the shapes of the fitting surfaces of selected teeth (#18, #16, #13, #23, #26, and #28). However, COAs showed significantly lower linear distortions in the arch level in most dimensions. DOAs on the other hand, showed significant distortions in linear measurements, especially in mediolateral dimensions. This mediolateral distortion in the DOAs was found to be positively correlated with increased arch length in these appliances. Conclusion: While DOAs can reproduce fitting surfaces of individual teeth at significantly higher accuracy than COAs, substantial linear distortions were observed in DOAs in the arch level, especially mediolaterally.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Craniofacial Science
Grantor dc:publisher
University of British Columbia
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alsammarraie, Mohammed Abdulsattar Abdulwahhab
Contributors dc:contributor
  • Wyatt, Chris, 1959-

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/88326

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Alsammarraie, Mohammed Abdulsattar Abdulwahhab. An in-vitro assessment of the accuracy of fitting and occlusal surfaces of digitally and conventionally fabricated occlusal appliances. master's thesis, University of British Columbia, 2024. http://hdl.handle.net/2429/88326