University of British Columbia
Additive printing of porous geopolymer concrete : assessing design mix and printability
Abstract
dc:descriptionThis research explores the 3D printing of a previously developed porous geopolymer, synthesized from an alumino-silicate source through polycondensation initiated by an alkaline activator. The binder utilized in this formulation comprised a combination of fly ash and ground granulated blast furnace slag, while the alkaline activator consisted of a mixture of sodium hydroxide and sodium silicate. To induce porosity, a 30% concentration of hydrogen peroxide was used as the air-incorporating agent. An extrusion-based 3D printer, significant to the construction industry, was employed for the printing process. The complexity of 3D printing stems from the interplay between printer settings and the properties of the mix at various stages, including mixing, pumping, extrusion, and building. In this study, printer settings were maintained consistently to isolate the printer's influence on the outcomes, allowing any enhancements in print quality to be attributed solely to adjustments in the mix formulation. Throughout the printing process, various stages presented challenges, prompting the introduction of different additives: siliceous sand, polyethylene glycol, and urea. These additives were selected to address issues such as uncontrollable flow, inadequate structural recovery post-extrusion, and limited working time. To understand the impact of these additives, rheological assessments were conducted. These included flow curve tests, strain sweep tests, and modulus recovery tests, designed to evaluate the mix's apparent viscosity, yield stress, and structural recovery capabilities. The results emphasized the crucial role of polyethylene glycol in this geopolymer formulation, necessitated by the mixture’s inherent difficulty in recovering its structure post-extrusion. The addition of siliceous sand, in conjunction with polyethylene glycol, enhanced the overall printability of the geopolymer. Conversely, urea did not prove effective in extending the working time and adversely affected extrudability.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Civil Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Rahimi, Bahare
- Contributors dc:contributor
-
- Siddiqua, Sumi
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/88453