Back to search

University of British Columbia

Improving surface quality of a polyester coating on veneer-faced honeycomb composite panel

Abstract

dc:description

Aircraft cabinets, furniture and wall panels in executive jets are typically made of low-density, lightweight core panels known as sandwich panels. These panels may be bonded to a wood composite with an outer figured wood veneer. This surface veneer is used for decorative effect. A clear high-gloss polyester or polyurethane coating is used to protect the decorative veneer surface and enhance its visual appeal. However, coatings on aviation panels develop surface defects due to changes in relative humidity in aircraft cabins and shrinkage and swelling of wood veneer. Phenol formaldehyde (PF) resin treatment can dimensionally stabilize wood and improve coating performance. I hypothesize a low molecular PF resin treatment will reduce the moisture-induced dimensional changes in exotic wood veneer used on aviation panels and restrict development of defects in the coating applied to the veneer. I first explored moisture absorption and changes in surface roughness of exotic face-veneer exposed to cyclic variation in relative humidity. Veneers that responded adversely to moisture cycling were selected and treated with low molecular weight PF resin and then exposed to cyclic variation in relative humidity. A brush coat of low molecular weight PF resin (30% w/w) reduced the changes in surface roughness of unfinished panels when subjected to moisture cycling. Dip treatment of decorative veneers with a higher concentration low molecular weight PF resin solution (40% w/w) was able to significantly reduce coating defects on substrates exposed to moisture cycling. The effectiveness of the treatment varied with veneer species. I conclude that PF resin treatment is a promising method of restricting the severity of surface defects in a polyester coating on figured veneer used for decoration on aviation panels, but the treatment needs to be tailored to different veneers because they vary in their dimensional stability.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Forestry
Grantor dc:publisher
University of British Columbia
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Moheb Khosravi, Farbod
Contributors dc:contributor
  • Evans, P. D. (Philip D.)

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/88686

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Moheb Khosravi, Farbod. Improving surface quality of a polyester coating on veneer-faced honeycomb composite panel. master's thesis, University of British Columbia, 2024. http://hdl.handle.net/2429/88686