Back to search

University of British Columbia

Pretreatment of hydrothermal liquefaction aqueous from municipal sludge by hydrogen peroxide for enhanced biological treatment

Abstract

dc:description

Wastewater treatment plants (WWTP) generate mixed sludge (MS) containing high volumes of organic and inorganic matter, posing treatment and disposal challenges. Hydrothermal liquefaction (HTL) is a potential thermo-chemical technology for converting sludge to fuel (biocrude oil) offering a smaller footprint alternative to typical sludge digestion methods such as anaerobic digestion (AD) for treating high-volume sludge. However, the large amount of aqueous by-product (HTLaq) from the HTL poses challenges for industrial-scale use. Onsite biological treatment can be a low-cost and effective solution for HTLaq. Whereas, complex substances and highly soluble organic compounds in HTLaq inhibit downstream biological treatment processes, making pretreatment of HTLaq before biological treatment a necessity for commercializing HTL in sludge management. This study used hydrogen peroxide (H₂O₂) to pretreat HTLaq, derived from municipal sludge cake at HTL conditions of 350ºC for 15 min residence time, and the biodegradability efficiency of pretreated HTLaq was evaluated. Previous studies used HTLaq from other feedstocks. Quenchers, such as sodium carbonate (Na₂CO₃) and sodium sulphite (Na₂SO₃), were used to remove the residual H₂O₂ from the pretreated HTLaq, which caused discrepancies in total chemical oxygen demand (tCOD) results and additional inhibition in downstream biological treatment. Pretreatment of aqueous for 2 h at dosages of 0.25, 0.50, and 0.75 g H₂O₂/g COD of HTLaq, followed by a quencher addition (H₂O₂: quencher at 1:1 (w/w)) and 3 h waiting period, achieved the highest efficiency in tCOD removal from HTLaq. Approximately 18% of tCOD removal was achieved from pretreated HTLaq at 0.75 g H₂O₂/g COD with sodium carbonate as a quencher. Additionally, pretreated HTL at 0.5 g H₂O₂/g COD with Na₂CO₃ as a quencher achieved a reduction of phenolics by 50% compared to unpretreated HTLaq. Further biological degradability assessments using mesophilic and thermophilic biochemical methane potential (BMP) assays yielded 16% and 63% higher specific cumulative methane yield, respectively, for pretreated HTLaq at 0.25 g H₂O₂/g COD with Na₂CO₃ quencher. Additionally, the aerobic biodegradability index, estimated by the ultimate biochemical oxygen demand (BOD)/tCOD ratio, increased from 0.75 to 0.85 for HTLaq pretreated assays. Results indicate that low-dosage H₂O₂ can be suitable for pretreating HTLaq before downstream biological treatment.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rahman, Nahian
Contributors dc:contributor
  • Eskicioglu, Cigdem

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/89586

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Rahman, Nahian. Pretreatment of hydrothermal liquefaction aqueous from municipal sludge by hydrogen peroxide for enhanced biological treatment. master's thesis, University of British Columbia, 2024. http://hdl.handle.net/2429/89586