University of British Columbia
Multifunctional hybrid thermoplastic composites reinforced with flax fibres and asphaltene-based carbon fibre interleaves
Abstract
dc:descriptionNatural fibre reinforced polymers (NFRPs) are a sustainable alternative to synthetic fibre composites. However, their interfacial properties and electrical insulation nature have limited the use of NFRPs in structural and non-structural applications. This study focuses on the manufacturing and characterization of a multifunctional flax fibre-reinforced thermoplastic polymer interleaved with centrifugal-spun carbon fibres derived from Alberta Oilsands Asphaltene (AOA) as an economically viable precursor. In the first stage, the carbon fibres were successfully re-oxidized through ozone treatment, dispersed in water and drained to form carbon fibre sheets. The carbon fibre layers (5+/-1% in volume fraction) were then alternated between flax fibre layers (39+/-2% in volume fraction), and the hybrid composite was manufactured via vacuum-assisted resin infusion (VARI). The tensile properties and short-beam shear strength of full-flax control and the hybrid materials were tested, as well as the electrical conductivity and electromagnetic interference (EMI) shielding capability. Results showed that the addition of carbon fibre interleaves did not compromise the mechanical properties of the composite, while it drastically increased the in-plane electrical conductivity by six orders of magnitude and the EMI shielding capability by two orders of magnitude. The thermo-mechanical analysis through dynamic mechanical analysis (DMA) and thermal stability analysis through thermogravimetric analysis (TGA) also indicated similar results between full-flax control and hybrid materials. In the next stage, mode I and mode II fracture toughness tests were performed on eight-ply full flax control and those with one carbon fibre layer in the mid-plane as an interleaf for interfacial toughening. Results showed that carbon fibre interleaving slightly decreased the mode I fracture toughness, but increased the precracked (PC) mode II fracture toughness by 40%. A comparison between asphaltene-based carbon fibres (A-CF) and commercial carbon fibres (C-CF) as interleaves in NFRPs was also attempted. The results were summarized with a multidimensional radar chart, highlighting an advantage in cost and a comparable in-plane electrical conductivity and EMI shielding capability.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Materials Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Yan, Shengnan
- Contributors dc:contributor
-
- Abdin, Yasmine
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/92671