Back to search

University of British Columbia

Quantification of heat transfer associated with water cooling in dies for low pressure die casting

Abstract

dc:description

The low-pressure die casting (LPDC) process is widely used to manufacture aluminum alloy wheels and other rotationally symmetric components. Effective thermal management of the die is essential to control solidification and avoid casting defects. Water-cooled channels embedded in the die play a key role in heat extraction, yet their design is often based on trial and error knowledge due to limited fundamental understanding of boiling behavior under transient cooling conditions. This research investigates the evolution of boiling heat transfer regimes in water-cooled steel channels under LPDC-relevant conditions. A lab-scale experimental system was developed using a heated H13 steel block with internal water channels and subsurface thermocouples to measure transient temperature histories. The recorded data were analyzed using an inverse heat conduction (IHC) algorithm to determine surface heat transfer coefficients (HTCs) as a function of time and temperature. The resulting boiling curves reveal four distinct regimes: an initial unsteady boiling region, a partial subcooled boiling regime dominated by nucleate boiling, a transition boiling region, and a single-phase convection regime. The partial boiling region was identified as the most effective for heat extraction, with its behavior strongly influenced by flow rate, initial die temperature, coolant temperature, and flow duration. Empirical correlations were developed for each heat transfer regime, including a modified Dittus–Boelter equation for the single-phase region. These correlations were implemented in a forward thermal model to assess their predictive capability. The model demonstrated strong agreement with experimental measurements across a range of cooling scenarios, including steady-state and interrupted flow conditions.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Saadah Binti Othman, Anis Umi
Contributors dc:contributor
  • Maijer, Daan M.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/93385

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Saadah Binti Othman, Anis Umi. Quantification of heat transfer associated with water cooling in dies for low pressure die casting. doctoral thesis, University of British Columbia, 2025. http://hdl.handle.net/2429/93385