Back to search

University of British Columbia

High temperature drying of corn silage

Abstract

dc:description

Rotary drum dryers are widely used in industrial agriculture because they can process large volumes of green crops in a short time, but the high temperatures required for rapid evaporation often cause thermal degradation, reducing essential nutrients, while intense moisture transfer can make the material brittle, leading to physical damage and quality loss. Since many dryers are designed for multiple materials, they are rarely optimized for the specific thermal properties and drying kinetics of a single crop, resulting in significant energy waste as excess fuel is used to reach the desired moisture level.These issues are particularly evident when drying high-moisture corn silage, a fermented mixture of greens and immature kernels. This doctoral thesis establishes a benchmark for optimal operation of an industrial rotary dryer using production data collected from equipment in Olds, Alberta, which was used to calibrate a mathematical model for dryer optimization. Four system configurations were analyzed: a single dryer (baseline), a single dryer with exhaust air recirculation directly and via a heat exchanger, two dryers in series at reduced temperatures, and two dryers in series with exhaust air recirculation. In the base case, drying from 65% moisture (w.b.) at a feed rate of 3.5 t/h required 4,400 kJ/kg of water, with conditions adjusted to achieve 10% exit moisture, while the long-term average energy use of the production dryer was 6,360 kJ/kg of evaporated moisture. Modeling results showed that exhaust air recirculation up to 60% significantly reduced energy consumption, whereas higher rates decreased drying efficiency due to moisture buildup, and two-stage drying lowered operating temperatures while reducing overall specific energy use. Across a temperature range of 50–200°C, no clear relationship was observed between drying temperature and nutritional properties, although biomass breakage exceeded 20% when moisture content dropped to 5%.By integrating experimental results, full-scale production data, and validated modeling, this study identifies practical strategies to improve energy efficiency while maintaining corn silage quality.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aliahmadi, Mohammad
Contributors dc:contributor
  • Sokhansanj, Shahab
  • Cao, Yankai

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/94289

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Aliahmadi, Mohammad. High temperature drying of corn silage. doctoral thesis, University of British Columbia, 2026. http://hdl.handle.net/2429/94289