Back to search

University of British Columbia

Electrochemical flow-assisted lithium extraction from Canadian oilfield brine

Abstract

dc:description

Commercial lithium production relies primarily on hard-rock ores and lithium-rich salar brines. Although these resources have supported industry growth, their development requires substantial energy, land, water, and processing time. Lithium production is also geographically concentrated, creating vulnerabilities in the battery-material supply chain. Extraction of lithium from oilfield brines can expand domestic critical-mineral supply. This thesis investigated electrochemical lithium extraction from a Canadian oilfield brine using a symmetric flow cell equipped with lithium manganese oxide (LMO) electrodes. The system was validated under single-ion and simulated multi-ion electrolyte conditions before being evaluated using real Canadian oilfield brine. Galvanostatic electrochemical testing, combined with solution and electrode characterization (AAS, ICP, SEM, CV, and XRD), were employed to evaluate lithium recovery performance and identify the mechanisms responsible for electrode degradation. To the best of our knowledge, this is the first demonstration of electrochemical lithium extraction from a real Canadian oilfield brine in an electrochemical flow cell. Despite a low Li⁺ concentration of 0.009 M, a Na⁺/Li⁺ ratio of approximately 200, and substantial concentrations of K⁺, Mg²⁺, and Ca²⁺, the system extracted approximately 73% of the available lithium per cycle and achieved an overall lithium recovery efficiency of 75%. Separation coefficients of 2166, 547, 1615, and 1196 were obtained for Li⁺ over Na⁺, K⁺, Mg²⁺, and Ca²⁺, respectively. The system achieved a lithium insertion capacity of 12.04 mg Li g⁻¹ LMO and an energy consumption of 20.91 Wh mol⁻¹ Li. Mechanistic analysis identified oxygen evolution, electrolyte acidification, and manganese dissolution as the primary factors limiting electrode stability and charge utilization. A system-specific Pourbaix diagram was developed to establish thermodynamically favorable operating conditions. Guided by this analysis, a constant-current-constant-voltage operating strategy was implemented which successfully reduced manganese dissolution while improving Faradaic efficiency through electrode-potential control. Increasing the operating temperature from 20 to 70 °C decreased the Faradaic efficiency from 53% to 41% and accelerated electrolyte acidification and manganese dissolution. Overall, this work demonstrates the feasibility of selective electrochemical lithium recovery from Canadian oilfield brines and establishes electrode-potential control and temperature management as key strategies for improving the stability and performance of electrochemical direct lithium extraction systems.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Vyas, Vrisha Nilesh
Contributors dc:contributor
  • Amini, Kiana

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/95280

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Vyas, Vrisha Nilesh. Electrochemical flow-assisted lithium extraction from Canadian oilfield brine. master's thesis, University of British Columbia, 2026. http://hdl.handle.net/2429/95280