Back to search

University of British Columbia

Ultrasonic-assisted tilted helical grinding of ZrO₂ ceramics : groove formation, force modeling, and wheel wear mitigation

Abstract

dc:description

Zirconia (ZrO₂) ceramics possess exceptional mechanical and functional properties, but their high hardness and low fracture toughness make rough machining inefficient and prone to surface damage and severe wheel wear. To overcome these challenges, ultrasonic-assisted tilted helical grinding (UATHG) is proposed for grooving ZrO₂ ceramics, enabling high efficiency, satisfactory surface quality, and reduced wheel wear. Therefore, this thesis investigates the mechanisms of groove formation, grinding-force generation, and wheel wear mitigation. First, kinematic models are established for UATHG, tilted helical grinding (THG), helical grinding (HG), and conventional grinding (CG), together with a multi-mode experimental platform for validation. Single-grain trajectory analysis reveals that UATHG exhibits the most significant intermittent wheel-workpiece contact, promoting chip removal and heat dissipation. A groove-profile formation model is then developed for THG to predict groove geometry and guide wheel selection. With the recommended cone-shaped wheel, THG enables straight-wall grooving and reduces grinding force by up to 93% compared with CG while maintaining satisfactory surface quality. Second, a physics-based force model is developed for THG by decomposing the complex wheel-workpiece contact into the side face, rounded corner, and end face. The Rayleigh distribution is introduced to characterize stochastic grain protrusion and determine the average undeformed chip thickness, while a geometric contact criterion quantifies end-face material removal. Experimental validation yields a maximum prediction error below 20%, with average errors of 8.4% and 10.3% in the transverse and feed directions, respectively. Lastly, strategies for UATHG are proposed to mitigate wheel wear while enhancing surface quality, recommending an ultrasonic amplitude of 0.3 μm under the given conditions. Experimental results verify that grain wear and wheel loading are reduced by 23.5% and 27.9%, respectively, relative to THG, while a ductile-dominated surface is generated. UATHG with the preferred amplitude further reduces grinding force, grain wear, and wheel loading by 57.6%, 59.6%, and 49.4% compared to THG and HG, achieving better surface quality (Ra 0.178 μm, Sa 0.217 μm). By revealing the mechanism of groove formation, grinding force, and wear mitigation, this thesis provides practical guidance for high-efficiency, low-wear precision grooving of hard-brittle ceramics, thereby enabling reliable ceramic component manufacturing in demanding applications.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Deng, Chen
Contributors dc:contributor
  • Jin, Xiaoliang
  • Wu, Yongbo

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/95485

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Deng, Chen. Ultrasonic-assisted tilted helical grinding of ZrO₂ ceramics : groove formation, force modeling, and wheel wear mitigation. doctoral thesis, University of British Columbia, 2026. http://hdl.handle.net/2429/95485