University of British Columbia
In-situ imaging and analysis of defect formation during steered tow deposition of CFRP tape using automated fiber placement
Abstract
dc:descriptionAutomated Fiber Placement (AFP) is a well-established method for manufacturing large composite parts at high rates, but its capabilities remain limited by the formation of defects during steering. As a tow is steered, excess material length accumulates at the inner compressive edge, and insufficient length appears at the outer tension edge, together giving rise to defects such as folded wrinkles, unfolded wrinkles, in-plane waves, tow pull-up, and in-plane tow shearing. Direct experimental evidence of how these defects initiate and grow remains limited in the literature, largely due to the difficulty of imaging the tow close enough to observe its behavior at the roller nip-point. This work uses a custom tabletop AFP simulator instrumented with multiple synchronized camera views to directly observe defect formation and growth during steered depositions. Folded wrinkles were shown to form through pre-nip point buckling, while unfolded wrinkles formed after initial compaction with a delayed onset, confirming these are distinct defect types. In-plane waves were found to be deformations occurring at the compressive edge of the tow, while tow pull-up initiated at the outer edge and propagated inward. In-plane tow shearing was also observed and was found to temporarily delay the onset of folded wrinkles at the beginning of a deposition. Steering radius and tow width were identified as the most influential parameters across all defect types, with substrate tack determining how excess length was distributed among them, and deposition rate influencing the severity of several defects without changing their frequency of occurrence. These findings were consolidated into a simplified AFP processing window for defect avoidance.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Materials Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pederson, Ryan
- Contributors dc:contributor
-
- Poursartip, Anoush
- Clare, Adam T.
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/95739