Back to search

University of British Columbia

Numerical and experimental investigation of macro-scale mixing applied to pulp fibre suspensions

Abstract

dc:description

Effective mixing of pulp fibre suspensions is essential for many pulp and paper manufacturing processes. Pulp suspensions display non-Newtonian rheology and possess a yield stress, which complicates mixing. In order to improve our understanding of pulp mixing in agitated vessels, a series of studies was undertaken to assess the suitability of using computational fluid dynamics (CFD) to model these systems. CFD simulations for laboratory-scale and industrial-scale mixing chests were developed with the pulp suspensions treated as Bingham fluids. The computed flow fields were used to determine the dynamic response of the virtual mixers, which was then compared with experimental measurements providing very good agreement under conditions of moderate agitation. Comparison between calculations and measurements of torque and axial force was also good (relative average error of 12% to 24%). The simulation results provided insight into the mixing flow occurring within the systems, showing the formation of caverns around the impeller(s), the location of stagnation regions and the presence of channeling. However, the accuracy of these predictions was limited by the Bingham model used to describe the suspension's rheology and the uncertainty to which the suspension's yield stress could be measured. To assess the degree to which the approximated rheology contributed to the CFD results, the mixing of a model fluid having a well-defined rheology (Newtonian glycerin solution) was extensively investigated in a laboratory-scale vessel using a typical industrial geometry (rectangular chest, side-entering axial flow impeller). The flow fields were measured using particle image velocimetry (PIV) and compared with CFD computations for identical operating conditions. Good agreement was found (avg. 13.1% RMS deviation of local axial velocities) confirming that the approach used in the CFD model was adequate to calculate the complex mixing flow fields for a Newtonian fluid. These results encouraged further research on extending the combined CFD and PIV application on a system more closely representative of pulp suspension agitation. Calculations were then performed to select a suitable non-Newtonian model fluid and appropriate operating conditions to model pulp suspension mixing in the laboratory-scale vessel, with the dimensionless cavern diameter as the mixing criterion for conservation between the two systems.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gómez, Clara

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/9707

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gómez, Clara. Numerical and experimental investigation of macro-scale mixing applied to pulp fibre suspensions. doctoral thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/9707