Back to search

Central Florida

Low Strain Rate Studies Of Alumina Epoxy Composites Using Piezospectroscopy

Abstract

dc:description.abstract

Particulate composites are widely used in many aerospace and military applications as energetic materials, armor materials or coatings and their behavior under dynamic loads have gained increasing significance. The addition of modifiers such as alumina nanoparticles generally facilitates the improvement of the mechanical strength to density ratio due to high specific area and particle rigidity. This allows for sufficient particlematrix bonding and therefore improved stiffness and load transfer in the composite. Photo-luminescent α-alumina nanoparticles when embedded in an epoxy matrix allow for the added benefit of in situ measurements at low strain rates to provide stress-sensitive information using the particle piezospectroscopic (PS) property. To investigate the low strain rate behavior, cylindrical specimens of alumina-epoxy composites with varying volume fractions of alumina were fabricated using a casting process to ensure minimal surface finishing and reduced manufacturing time. The results illustrate the capability of alumina nanoparticles to act as diagnostic sensors to measure the stress-induced shifts of the spectral R-line peaks resulting from low compressive strain rates. The range of PS coefficients measured, -3.15 to -5.37 cm−1/GP a for R1 and -2.62 to -5.39 cm−1/GP a for R2, correlate well with static test results of similar volume fractions. Results reveal a general trend of increasing sensitivity of the PS coefficients with increasing strain rate when compared to similar materials under static conditions. In contrast to static results, at a given strain rate, the PS coefficients show varying degrees of sensitivity for each iii volume fraction. This information can be used to determine the time-dependent microscale stresses the nanoparticles sustain during composite loading. Additionally, this work facilitates failure prediction by monitoring upshifts in the PS information. Calibration of the in situ diagnostic stress sensing capabilities of varying volume fractions of alumina nanocomposites under quasi-static strain rates in this work sets the precedent for future studies at high strain rates.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jones, Ashley
Contributors dc:contributor
  • Raghavan, Seetha

Subjects

dc:subject × 7

Rights

Language dc:language
English

Identifiers

dc:identifier.*
Identifier
CFE0005099

Chain of custody

source
Harvested from
Central Florida
Base URL
stars.library.ucf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Jones, Ashley. Low Strain Rate Studies Of Alumina Epoxy Composites Using Piezospectroscopy. https://stars.library.ucf.edu/etd/2718