Back to search

University of Central Florida

SAW Correlator Temperature Compensation Using a Pulse Width Modulated Temperature Controller

Abstract

dc:description.abstract

A Surface Acoustic Wave (SAW) correlator built on a Lithium Niobate substrate is temperature compensated in order to maintain a constant center frequency. Frequency shifts as a result of temperature variations limit device performance. An Arduino®-based PWM temperature controller is developed to read the device temperature from a resistance temperature detector located on the SAW wafer and to regulate its temperature to a specified setpoint by providing current to a heater which is co-located with the temperature sensor on the SAW correlator substrate. The final temperature controller achieves frequency shifts of 0.013 MHz from room temperature with a worst-case PPM experienced over 30°C of temperature variation of 0.48 PPM°C. Linear and non-linear plant models are developed successfully to predict the device's temperature based on any input setpoint. Although there are alternatives to limit temperature drift at different temperatures, this thesis presents a simple method that works on a standard Lithium Niobate substrate.

Degree

thesis:*
Grantor dc:publisher
University of Central Florida

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Betancourt, Daniel
Contributors dc:contributor
  • Weeks, Arthur

Subjects

dc:subject × 1

Rights

Language dc:language
English

Identifiers

dc:identifier.*
Identifier
CFE0007787

Chain of custody

source
Harvested from
Central Florida
Base URL
stars.library.ucf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Betancourt, Daniel. SAW Correlator Temperature Compensation Using a Pulse Width Modulated Temperature Controller. University of Central Florida, https://stars.library.ucf.edu/etd/6727